logminer使用测试库进行挖掘分析，10.2.0.5

上一篇测试是在dg环境进行测试挖掘，但是如果客户存在一个测试库，那样使用日志挖掘的影响性更小。本篇进行测试分析。

测试环境介绍：

oracle linux 5.6，vmware虚拟机，安装两套单实例10.2.0.5数据库，一套模拟生产环境进行dml操作，另一套模拟测试环境进行日志相关挖掘。

测试流程说明：

1.生产环境，模拟dml操作，一个表A，产生一个delete 1行记录，执行两次，表B，执行一次delete操作， 30000条记录，日志切换（归档模式下），再次多切换几次日志

2.目标端，使用logminer 进行挖掘相关日志，最终得出相关分析。

一、生产环境日志模拟

SQL> show parameter name
NAME        VALUE
--------------------
db_name    test1

SQL> archive log list
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /u02/app/oracle/arch


SQL> create user test1 identified by test1;
SQL> create user test2 identified by test2;
SQL> grant dba to test1,test2;

SQL> conn test1/test1

SQL> create table a as select * from scott.emp;

SQL> delete a where rownum=1;

SQL> commit;

SQL> delete a where empno=7788;

SQL> commit;

SQL> alter system switch logfile;

SQL> conn test2/test2
SQL> create table b as select * from dba_objects;

SQL> insert into b select * from b;

SQL> insert into b select * from b

SQL> commit;

SQL> delete b where rownum<100000;

SQL> commit;

SQL> alter system archive log current;

SQL> select DEST_ID,THREAD# ,SEQUENCE#,COMPLETION_TIME,NAME from v$archived_log where COMPLETION_TIME >sysdate-20/1440;

DEST_ID THREAD# SEQUENCE# COMPLETION_TIME NAME
———- ———- ———- ——————- ——————————————————-
1 1 1 2019-01-12 12:02:42 /u02/app/oracle/arch/1_1_993126050.arc
1 1 2 2019-01-12 12:14:46 /u02/app/oracle/arch/1_2_993126050.arc
1 1 3 2019-01-12 12:16:46 /u02/app/oracle/arch/1_3_993126050.arc

二、测试库使用Logminer

1）logminer前提准备

添加存储过程

@?/rdbms/admin/dbmslmd.sql
@?/rdbms/admin/dbmslm.sql
@?/rdbms/admin/dbmslms.sql
@?/rdbms/admin/prvtlm.plb

开启最小补充日志

select SUPPLEMENTAL_LOG_DATA_MIN,SUPPLEMENTAL_LOG_DATA_PK,SUPPLEMENTAL_LOG_DATA_UI from v$database;

SQL> alter database add supplemental log data;

Database altered.

SQL> select SUPPLEMENTAL_LOG_DATA_MIN,SUPPLEMENTAL_LOG_DATA_PK,SUPPLEMENTAL_LOG_DATA_UI from v$database;

SUPPLEME SUP SUP
——– — —
YES NO NO

2）日志挖掘，在无数据字典的情况下，输出内容

SQL> exec dbms_logmnr_d.build(options => dbms_logmnr_d.STORE_IN_REDO_LOGS);

SQL> exec dbms_logmnr.add_logfile(‘/u02/app/oracle/arch/1_1_993126050.arc’,dbms_logmnr.new);

SQL> exec dbms_logmnr.add_logfile(‘/u02/app/oracle/arch/1_2_993126050.arc’,dbms_logmnr.addfile);

使用online 数据字典进行翻译，报错： dbid不同

SQL> execute dbms_logmnr.start_logmnr(options=>dbms_logmnr.dict_from_online_catalog);
BEGIN dbms_logmnr.start_logmnr(options=>dbms_logmnr.dict_from_online_catalog); END;

*
ERROR at line 1:
ORA-01295: DB_ID mismatch between dictionary USE_ONLINE_CATALOG and logfiles
ORA-06512: at “SYS.DBMS_LOGMNR”, line 58
ORA-06512: at line 1

SQL> exec DBMS_LOGMNR.START_LOGMNR(DictFileName=>”,Options=>0);

SQL> select sql_redo,sql_undo from V$LOGMNR_CONTENTS where sql_redo like ‘%insert into%’;

SQL_REDO SQL_UNDO
——————————————————————————–
insert into “UNKNOWN”.”OBJ# 8869″(“COL 1″,”COL 2″,”COL 3″,”COL 4″,”COL 5”) value
s (HEXTORAW(‘c2020d’),HEXTORAW(‘c104’),HEXTORAW(‘7465737431584442’),HEXTORAW(‘c1
06′),HEXTORAW(‘c102’));
delete from “UNKNOWN”.”OBJ# 8869″ where “COL 1” = HEXTORAW(‘c2020d’) and “COL 2”
= HEXTORAW(‘c104’) and “COL 3” = HEXTORAW(‘7465737431584442’) and “COL 4” = HEX
TORAW(‘c106’) and “COL 5” = HEXTORAW(‘c102’) and ROWID = ‘AAACKlAABAAAFRSAAA’;

在使用异机使用logminer挖掘，在没有数据字典的情况下，挖掘出来的只能是obj#，无法获取对象名称

select * from (
select rownum,username,SEG_OWNER,SEG_NAME,seg_type_name,OPERATION,a from (
select username,SEG_OWNER,SEG_NAME,seg_type_name,OPERATION,count(*) a
from V$LOGMNR_CONTENTS where OPERATION in(‘UPDATE’,’DELETE’,’INSERT’) group by username,SEG_OWNER,SEG_NAME,seg_type_name,
OPERATION order by 6 desc)) where rownum<20

M USERNAME SEG_OWNER SEG_NAME SEG_TYPE_NAME OPERATION A
– ———- ————— ————— ————— ——————————– ———-
1 UNKNOWN UNKNOWN OBJ# 51696 UNKNOWN INSERT 5925
2 UNKNOWN UNKNOWN OBJ# 51724 UNKNOWN INSERT 5820
3 UNKNOWN UNKNOWN OBJ# 51728 UNKNOWN INSERT 3990
4 UNKNOWN UNKNOWN OBJ# 9115 UNKNOWN INSERT 3240

https://blog.csdn.net/cuiyan1982/article/details/80333013

3）生产环境，修改参数使用文件存储数据字典，数据字典文件拷贝至测试库进行注册使用。

alter system set utl_file_dir=/abc scope=spfile; 生产环境需要重启，代价太高

startup force –实际环境不能这么干

SQL> exec dbms_logmnr_d.build(dictionary_filename=>’ar1.dic’,dictionary_location=>’/abc’,options=>dbms_logmnr_d.STORE_IN_FLAT_FILE);

测试环境，使用该数据字典，进行解析。

SQL> exec dbms_logmnr_d.build(options => dbms_logmnr_d.STORE_IN_REDO_LOGS);

SQL> exec dbms_logmnr.add_logfile(‘/u02/app/oracle/arch/1_1_993126050.arc’,dbms_logmnr.new);

SQL> exec dbms_logmnr.add_logfile(‘/u02/app/oracle/arch/1_2_993126050.arc’,dbms_logmnr.addfile);

SQL> exec DBMS_LOGMNR.START_LOGMNR(DictFileName=>’/abc/ar1.dic’,Options=>0);

ROWNUM USERNAME SEG_OWNER SEG_NAME SEG_TYPE_NAME OPERATION A
———- ———- ———- ——————– ——————– ———- ———-
1 UNKNOWN SYS WRH$_LATCH,WRH$_LATC TABPART INSERT 5925
H_1370159887_0

2 UNKNOWN SYS WRH$_SYSSTAT,WRH$_SY TABPART INSERT 5820
SSTA_1370159887_0

3 UNKNOWN SYS WRH$_PARAMETER,WRH$_ TABPART INSERT 3990
PARAME_1370159887_0

#查询数据字典文件（oracle根据数据字典，进行解析obj，转换为我们熟悉的用户名，表对象名称等）

CREATE_TABLE DICTIONARY_TABLE ( DB_NAME VARCHAR2(9), DB_ID NUMBER(20), DB_CREATED VARCHAR2(20), DB_DICT_CREATED VARCHAR2(20), DB_RESETLOGS_CHANGE# NUMBER(22
), DB_RESETLOGS_TIME VARCHAR2(20), DB_VERSION_TIME VARCHAR2(20), DB_REDO_TYPE_ID VARCHAR2(8), DB_REDO_RELEASE VARCHAR2(60), DB_CHARACTER_SET VARCHAR2(30), D
B_VERSION VARCHAR2(64), DB_STATUS VARCHAR2(64), DB_DICT_MAXOBJECTS NUMBER(22), DB_DICT_OBJECTCOUNT NUMBER(22), DB_DICT_SCN NUMBER(22), DB_THREAD_MAP RAW(8),
DB_TXN_SCNBAS NUMBER(22), DB_TXN_SCNWRP NUMBER(22));

INSERT_INTO DICTIONARY_TABLE VALUES (‘TEST1′,1370159887,’11/25/2018 09:58:39′,’01/12/2019 13:56:03′,420491,’11/25/2018 12:20:50′,’11/25/2018 11:36:00’,”,”
,’AL32UTF8′,’10.2.0.5.0′,’Production’,53160,50195,493175,,493793,0);

CREATE_TABLE OBJ$_TABLE (OBJ# NUMBER(22), DATAOBJ# NUMBER(22), OWNER# NUMBER(22), NAME VARCHAR2(30), NAMESPACE NUMBER(22), SUBNAME VARCHAR2(30), TYPE# NUMBE
R(22), CTIME DATE, MTIME DATE, STIME DATE, STATUS NUMBER(22), REMOTEOWNER VARCHAR2(30), LINKNAME VARCHAR2(128), FLAGS NUMBER(22), OID$ RAW(16), SPARE1 NUMBE
R(22), SPARE2 NUMBER(22), SPARE3 NUMBER(22), SPARE4 VARCHAR2(1000), SPARE5 VARCHAR2(1000), SPARE6 DATE );

INSERT_INTO OBJ$_TABLE VALUES (20,2,0,’ICOL$’,1,”,2,to_date(’04/20/2010 08:24:28′, ‘MM/DD/YYYY HH24:MI:SS’),to_date(’04/20/2010 08:32:25′, ‘MM/DD/YYYY HH24
:MI:SS’),to_date(’04/20/2010 08:24:28′, ‘MM/DD/YYYY HH24:MI:SS’),1,”,”,0,,0,1,,”,”, );

4）生产环境，将数据字典，写入Online redo文件中，切换归档，拷贝至测试库，注册后使用。

实际环境中，根本不允许生产环境随便重启库修改参数文件，因此在线操作更可取。

SQL> alter database add supplemental log data; –需要开启最小补充日志

SQL> exec DBMS_LOGMNR_D.BUILD(dictionary_filename=>NULL,dictionary_location=>NULL,options=>dbms_logmnr_d.STORE_IN_REDO_LOGS);

col name format a90
set linesize 150
select name,ARCHIVED,DICTIONARY_BEGIN,DICTIONARY_END from v$archived_log where name like ‘%.arc’;

NAME ARC DIC DIC
——————————————— — — —

/u02/app/oracle/arch/1_9_993126050.arc YES YES YES

选择将此归档文件进行copy，无需手工切换，因为执行exec写入redo，会自动切换产生归档日志

测试环境，导入这个归档日志：

SQL> exec dbms_logmnr_d.build(options => dbms_logmnr_d.STORE_IN_REDO_LOGS);