Automatic Job Closing / Completion
一般的工单流程:
- Create the job
- Issue materials
- Receive quantities through each operation on the job
- Receive quantities from the job to finished goods when it has passed through the last operation
- Use Job Completion / Closing Maintenance to complete / close the job.
Epicor® 提供了工单完成/关闭的自动化处理。 本文介绍了如何进行设置。
Job Complete / Close Parameters
定义参数，路径：Production Management / Job Management / Setup.
每个阈值由物料、工序和外包标准定义。
可以通过数量和成本差异百分比进一步定义此标准。
或者，可以通过在“工单成本低于或高于”字段中输入差异金额，使用货币阈值来设置代码阈值。
建立结束代码后，可以选择将它们分配给特定的产品组。无论产品组如何，都可以将代码设置为默认代码。
此外，可以通过选中“Make Direct Job”复选框，将“不直接出货的作业”排除在处理之外。
默认情况下，Epicor®应用程序处理所有指定的工单。
Implement Your Codes
参数代码定义好后，在产品组上选择对应的参数代码。生产这些Part的工单则根据对应的参数进行自动完成/关闭处理。
任何未完成的工单则显示在Job Completion Exception Tracker，未关闭的工单则显示在Job Closing Exception Tracker，使用追踪来确定未完成/关闭的原因。
Detail Fields
Closing Code
A unique code to identify the job closing record. Enter a concise value that will help you quickly identify the closing code.
Code…
Click this button to search for existing records. This search program pulls in the record type displayed on the button label.
Complete Inspection in Pending Jobs
When selected, this check box indicates that jobs awaitinginspection can still be automatically completed through this code. When this check box is clear, however, the Auto Job Completion Process will ignore any jobs awaiting inspection.
>> Important: Jobs that have not completed inspection cannot be closed.
Description
A concise explanation that further defines the closing code.
Job Closing
When selected, this check box indicates that this code will automatically close jobs.
Job Closing Default
When selected, this check box indicates that this code will be the default closing code within the system. If a closing code is not selected on a product group, the system will use this default code to close jobs within this group.
>> Important: If you do not select a default closing code within this maintenance program, the manufacturing system will not close jobs automatically.
Job Completion
When selected, this check box indicates that this code will automatically complete jobs.
Job Completion Default
When selected, this check box indicates that this code will be the default completion code within the system. If a closing code is not selected on a product group, the system will use this default code to complete jobs within this group.
>> Important: If you do not select a default completion code within this maintenance program, the manufacturing system will not complete jobs automatically.
Job Cost Over
A monetary threshold that can be used to automatically close or complete a job. The Job Cost Over value defines how much above its estimated cost a job can be before it is completed/closed. If you enter a value in this field, the Auto Job Completion/Close process will activate this costing method; this process is run before other completion/close methods.
Job Cost Under
A monetary threshold that can be used to automatically close or complete a job. The Job Cost Under value defines how much below its estimated cost a job can be before it is completed/closed. If you enter a value in this field, the Auto Job Completion/Close process will activate this costing method; this process is run before other completion/close methods.
If the difference between the Estimated Job Costs and the Actual Job Costs is less than or equal to the Job Cost Under value, the job is automatically completed or closed. Note however, that other limitations, like active labor transactions and pending inspections, can still prevent a job from being completed or closed.
Material Cost Over %
The material threshold for the code; you can enter percentages for cost. These are variance percentages that measure the actual material values against the estimated material values. Any jobs that have material values that fall under one of these percentages will not be automatically closed or completed.
Material Cost Under %
The material threshold for the code; you can enter percentages for cost. These are variance percentages that measure the actual material values against the estimated material values. Any jobs that have material values that fall under one of these percentages will not be automatically closed or completed.
Material Quantity Over %
The material threshold for the code; you can enter percentages for quantity. These are variance percentages that measure the actual material values against the estimated material values. Any jobs that have material values that fall under one of these percentages will not be automatically closed or completed.
Material Quantity Under %
The material threshold for the code; you can enter percentages for quantity. These are variance percentages that measure the actual material values against the estimated material values. Any jobs that have material values that fall under one of these percentages will not be automatically closed or completed.
Operation Cost Over %
The operation threshold for the code; you can enter percentages for cost. These are variance percentages that measure the actual operation sequence values against the estimated operation sequence values. Any jobs that have operation values that fall under one of these percentages will not be automatically closed or completed.
Operation Cost Under %
The operation threshold for the code; you can enter percentages for cost. These are variance percentages that measure the actual operation sequence values against the estimated operation sequence values. Any jobs that have operation values that fall under one of these percentages will not be automatically closed or completed.
Operation Quantity Over %
The operation threshold for the code; you can enter percentages for quantity. These are variance percentages that measure the actual operation sequence values against the estimated operation sequence values. Any jobs that have operation values that fall under one of these percentages will not be automatically closed or completed.
Operation Quantity Under %
The operation threshold for the code; you can enter percentages for quantity. These are variance percentages that measure the actual operation sequence values against the estimated operation sequence values. Any jobs that have operation values that fall under one of these percentages will not be automatically closed or completed.
Subcontract Cost Over %
The subcontract threshold for the code; you can enter percentages for quantity and/or cost. These are variance percentages that measure the actual subcontract values against the estimated subcontract values. Any jobs that have subcontract values that fall under one of these percentages will not be automatically closed or completed.
Subcontract Cost Under %
The subcontract threshold for the code; you can enter percentages for cost. These are variance percentages that measure the actual subcontract values against the estimated subcontract values. Any jobs that have subcontract values that fall under one of these percentages will not be automatically closed or completed..
Subcontract Quantity Over %
The subcontract threshold for the code; you can enter percentages for quantity. These are variance percentages that measure the actual subcontract values against the estimated subcontract values. Any jobs that have subcontract values that fall under one of these percentages will not be automatically closed or completed.
Subcontract Quantity Under %
The subcontract threshold for the code; you can enter percentages for quantity. These are variance percentages that measure the actual subcontract values against the estimated subcontract values. Any jobs that have subcontract values that fall under one of these percentages will not be automatically closed or completed.
Creating a Schedule to Run the Process Periodically
在系统代理中设置一个时间表来定期运行工单完成处理。
Submit the Auto Complete / Close Processes to This Schedule