使用Mininet创建Topo

Python脚本实现创建拓扑

#coding:utf-8
from mininet.net import Mininet
from mininet.topo import LinearTopo

# 四个交换机每个下边挂载一个主机

Linear4 = LinearTopo(k=4)
net = Mininet(topo=Linear4)
net.start()
net.pingAll()
net.stop()

# single,3

from mininet.topo import SingleSwitchTopo

Single3 = SingleSwitchTopo(k=3)
net = Mininet(topo=Single3)
net.start()
net.pingAll()
net.stop()


# tree,depth=2,fanout=2

from mininet.topolib import TreeTopo

Tree22 = TreeTopo(depth=2, fanout=2)
net = Mininet(topo=Tree22)
net.start()
net.pingAll()
net.stop()

# create 1 switch,2 host,set hosts IP

net = Mininet()

# Creating nodes in the network
c0 = net.addController()
h0 = net.addHost(\'h0\')
s0 = net.addSwitch(\'s0\')
h1 = net.addHost(\'h1\')
# Creating links between nodes in network
net.addLink(h0, s0)
net.addLink(h1, s0)
# configuration of IP address in interfaces
h0.setIP(\'192.168.1.1\', 24)
h1.setIP(\'192.168.1.2\', 24)

net.start()
net.pingAll()
net.stop()

# add more limits to the host

from mininet.net import Mininet
from mininet.node import CPULimitedHost
from mininet.link import TCLink

net = Mininet(host=CPULimitedHost, link=TCLink)
# Creating nodes in the network
c0 = net.addController()
s0 = net.addSwitch(\'s0\')
h0 = net.addHost(\'h0\')
h1 = net.addHost(\'h1\', cpu=0.5)
h2 = net.addHost(\'h2\', cpu=0.5)
net.addLink(s0, h0, bw=10, delay=\'5ms\',max_queue_size=1000, loss=10, use_htb=True)
net.addLink(s0, h1)
net.addLink(s0, h2)
net.start()
net.pingAll()
net.stop()

命令行创建topo

• 最小拓扑，1s,2h

# sudo mn --topo minimal

• linear 4s,4h

# sudo mn --topo linear,4

• single,1s,3h

# sudo mn --topo single,3

• tree,depth:2,fanout=2

# sudo mn --topo tree, fanout=2,depth=2

交互模式

# sudo mn
mininet>py net.addHost(\'h3\')
mininet>py net.addLink(s1, net.get(\'h3\'))
mininet>py s1.attach(\'s1-eth3\')
mininet>py net.get(\'h3\').cmd(\'ifconfig h3-eth0 10.3\')
mininet>h1 ping -c1 10.3
mininet>px from mininet.util import dumpNodeConnections
mininet>py dumpNodeConnections(net.hosts)
mininet>py net.pingAll()