IP:
192.168.56.11 主
192.168.56.12 从

1、#下载安装包
wget –no-check-certificate https://github.com/ideawu/ssdb/archive/master.zip
unzip master.zip
[root@node2 src]# cd ssdb-master/
[root@node2 ssdb-master]# make

默认安装在 /usr/local/ssdb 目录下

[root@node2 ssdb-master]# make install

2、修改启动脚本

[root@node2 ssdb-master]# cp tools/ssdb.sh /etc/init.d/ssdb

[root@node2 ssdb-master]# vim /etc/init.d/ssdb
configs=”/usr/local/ssdb/ssdb.conf”

3、加入启动项

[root@node2 src]# chkconfig –add ssdb
[root@node2 src]# chkconfig ssdb on
[root@node2 src]# chkconfig –list ssdb
ssdb 0:off 1:off 2:on 3:on 4:on 5:on 6:off

4、配置命令路径

vim /etc/profile

PATH=$PATH:/usr/local/ssdb
export PATH

source /etc/profile

5.修改配置文件

master：

[root@linux-node1 ssdb]# cat ssdb.conf
ssdb-server config
MUST indent by TAB!

absolute path, or relative to path of this file, directory must exists
work_dir = ./var
pidfile = ./var/ssdb.pid

server:
ip: 192.168.56.11
port: 8888
# bind to public ip
#ip: 0.0.0.0
# format: allow|deny: all|ip_prefix
# multiple allows or denys is supported
#deny: all
#allow: 127.0.0.1
#allow: 192.168
# auth password must be at least 32 characters
#auth: very-strong-password
#readonly: yes
# in ms, to log slowlog with WARN level
#slowlog_timeout: 5

replication:
binlog: yes
# Limit sync speed to *MB/s, -1: no limit
sync_speed: -1
slaveof:
# to identify a master even if it moved(ip, port changed)
# if set to empty or not defined, ip:port will be used.
#id: svc_2
# sync|mirror, default is sync
#type: sync
#host: localhost
#port: 8889

logger:
level: debug
output: log.txt
rotate:
size: 1000000000

leveldb:
# in MB
cache_size: 500
# in MB
write_buffer_size: 64
# in MB/s
compaction_speed: 1000
# yes|no
compression: yes

[root@linux-node1 ssdb]#

++++++++++++++++++++++++++++++++++++++++++++++++++
slave ：

[root@linux-node2 ssdb]# cat ssdb.conf
ssdb-server config
MUST indent by TAB!

absolute path, or relative to path of this file, directory must exists
work_dir = ./var
pidfile = ./var/ssdb.pid

server:
ip: 192.168.56.12
port: 8888
# bind to public ip
#ip: 0.0.0.0
# format: allow|deny: all|ip_prefix
# multiple allows or denys is supported
#deny: all
#allow: 127.0.0.1
#allow: 192.168
# auth password must be at least 32 characters
#auth: very-strong-password
#readonly: yes
# in ms, to log slowlog with WARN level
#slowlog_timeout: 5

replication:
binlog: yes
# Limit sync speed to *MB/s, -1: no limit
sync_speed: -1
slaveof:
# to identify a master even if it moved(ip, port changed)
# if set to empty or not defined, ip:port will be used.
id: node-1 #配置主服务器id
# sync|mirror, default is sync
type: sync #同步方式
host: 192.168.56.11 #主机ip
port: 8888 #端口

logger:
level: debug
output: log.txt
rotate:
size: 1000000000

leveldb:
# in MB
cache_size: 500
# in MB
write_buffer_size: 64
# in MB/s
compaction_speed: 1000
# yes|no
compression: yes

[root@linux-node2 ssdb]#

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
6、登陆测试
master:
[root@linux-node1 ssdb]# ./ssdb-cli 192.168.56.11 -p8888
ssdb (cli) – ssdb command line tool.
Copyright (c) 2012-2016 ssdb.io

\’h\’ or \’help\’ for help, \’q\’ to quit.

ssdb-server 1.9.6

ssdb 192.168.56.11:8888> set name tom
ok
(0.001 sec)
ssdb 192.168.56.11:8888> set age 18
ok
(0.001 sec)
ssdb 192.168.56.11:8888> get name
tom
(0.000 sec)
ssdb 192.168.56.11:8888> get age
18
(0.001 sec)
ssdb 192.168.56.11:8888>

slave:
[root@linux-node2 ssdb]# ./ssdb-cli 192.168.56.12 -p8888
ssdb (cli) – ssdb command line tool.
Copyright (c) 2012-2016 ssdb.io

\’h\’ or \’help\’ for help, \’q\’ to quit.

ssdb-server 1.9.6

ssdb 192.168.56.12:8888> get name
tom
(0.001 sec)
ssdb 192.168.56.12:8888> get age
18
(0.000 sec)
ssdb 192.168.56.12:8888>