在使用Samba进行建立Window与Linux共享时，要是不能访问,出现“您可能没有权限使用网络资源”，

那就是SELinux在作怪了
要是想让共享目录能访问，可以使用命令
#setenforce 0
暂时停掉SELinux
使用
#setenforce 1
启用SELinux
 
有关SELinux 在系统中的作用就不讲了，另外一种方法可以不用关闭SELinux.以下命令将允许这个权限：
setsebool -P samba_enable_home_dirs=1
若SElinux啟用中，在Windows檔案總管無法連到 Samba 所分享出來的目錄時，

在Linux 中，可執行下列指令：

setsebool -P samba_enable_home_dirs on

 

參考文件： /etc/samba/smb.conf

#—————
# SELINUX NOTES:
# 分享群組
# If you want to use the useradd/groupadd family of binaries please run:
# setsebool -P samba_domain_controller on
#

# 分享home目錄
# If you want to share home directories via samba please run:
# setsebool -P samba_enable_home_dirs on
#
# If you create a new directory you want to share you should mark it as
# “samba-share_t” so that selinux will let you write into it.
# Make sure not to do that on system directories as they may already have
# been marked with othe SELinux labels.
#
# Use ls -ldZ /path to see which context a directory has
#
# Set labels only on directories you created!
# To set a label use the following: chcon -t samba_share_t /path
#
# If you need to share a system created directory you can use one of the
# following (read-only/read-write):
# setsebool -P samba_export_all_ro on
# or
# setsebool -P samba_export_all_rw on
#
# If you want to run scripts (preexec/root prexec/print command/…) please
# put them into the /var/lib/samba/scripts directory so that smbd will be
# allowed to run them.
# Make sure you COPY them and not MOVE them so that the right SELinux context
# is applied, to check all is ok use restorecon -R -v /var/lib/samba/scripts
#
#————–
#

版权声明：本文为zzyyxxjc原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://www.cnblogs.com/zzyyxxjc/p/4489508.html