搭建2个节点的hdfs,yarn集群。 namenode和secondarynamenode是分开的,其次rm和namenode位于不同节点。

0.规划
 
两个节点:
 
ip
部署的程序
备注
192.168.56.2/bigdata.lzf
namenode,datanode,NodeManager,hive,presto,mysql,hive-metastore,presto-cli
主节点
192.168.56.3/bigdata.dn1.lzf
secondarynode,resourceManager,NodeManager,hive,presto,presto-cli
资源管理节点
 
hive由于不存在主从的问题,虽然metastore也可以部署多个。
如果有必要resourceManager也可以部署多个。
 
1.公共操作
 
1.1 创建用户
group add hadoop
useradd hadoop -G hadoop
 
1.2 设置ssh互通
使用rsa的互通
 
   1.2.1 分别在2,3机器上执行如下(hadoop用户下)
ssh-keygen -t rsa -P \'\' -f ~/.ssh/id_rsa
cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys
chmod 0600 ~/.ssh/authorized_keys

   1.2.2 把3的id_rsa.pub 复制到 2的id_rsa.pub_sl

       ssh bigdata.dn1.lzf
       cd .ssh
       scp id_rsa.pub hadoop@bigdata.lzf:~/.ssh/id_rsa.pub_sl
   1.2.3 把2的 id_rsa.pub_sl 追加都2的authorized_keys
       cd .ssh
       cat id_rsa.pub_sl>> authorized_keys 
   1.2.4 把2的authorized_keys复制到到3的/home/hadoop/.ssh/下
     
   之后进行验证:
  chmod 700 ~/.ssh
  chmod 600 ~/.ssh/authorized_keys  
  
  在2下执行ssh bigdata.dn1.lzf
  在3下执行ssh bigdata.lzf
  成功,则可以继续了。
  注:
   a.如果有更多的节点,操作时类似的,就是把所有的id_rsa.pub合并在一起,然后追加到主机的 authorized_keys ,最后把主机authorized_keys复制到各个节点上即可。
   b.至于使用rsa还是dsa看具体情况。
 
1.3 目录
 
以hadoop身份执行
mkdir -p  /home/hadoop/data_hadoop/hdfs/name
mkdir -p   /home/hadoop/data_hadoop/hdfs/data
mkdir -p /home/hadoop/data_hadoop/tmp
 
1.4 安装软件
在/home/haoop下安装
hadoop-2.8.0
 
1.5 环境变量配置
 
export JAVA_HOME=/usr/local/jdk1.8.0_131
export HADOOP_HOME=/home/hadoop/hadoop-2.8.0
export HADOOP_CONF_DIR=/home/hadoop/hadoop-2.8.0/etc/hadoop
export HADOOP_YARN_HOME=$HADOOP_HOME
export HADOOP_MAPRED_HOME=$HADOOP_HOME
export HADOOP_PREFIX=$HADOOP_HOME
export PATH=$PATH:$HOME/.local/bin:$HOME/bin:$JAVA_HOME/bin:$HADOOP_HOME/bin
 
1.6 修改各个env.sh和日志
根据单机的配置即可。
修改 etc/hadoop/log4j.properties 添加如下:
log4j.logger.org.apache.hadoop.util.NativeCodeLoader=DEBUG
 
2.节点配置
 
2.1 192.168.56.2   配置
 
core-site.xml
 
<property>
 <name>fs.defaultFS</name>
 <value>hdfs://bigdata.lzf:9001</value>
 <description>HDFS的URI,文件系统://namenode标识:端口号,默认是9000</description>
</property>
<property>
 <name>hadoop.tmp.dir</name>
 <value>/home/hadoop/data_hadoop/tmp</value>
 <description>namenode上本地的hadoop临时文件夹</description>
</property>
<property>
  <name>ipc.client.connect.max.retries</name>
  <value>100</value>
  <description>默认10次,现在配置100次</description>
</property>
<property>
  <name>ipc.client.connect.retry.interval</name>
  <value>10000</value>
  <description>连接间隔1秒钟,默认是0.1秒</description>
</property>
  –为了权限,例如通过beeline之类的通过访问
  添加以下内容:
<property>
 <name>hadoop.proxyuser.hadoop.hosts</name>
 <value>*</value>
</property>
<property>
 <name>hadoop.proxyuser.hadoop.groups</name>
 <value>*</value>
</property>
 
hdfs-site.xml 
 
<property>
    <name> dfs.namenode.name.dir</name>
    <value>/home/hadoop/data_hadoop/hdfs/name</value>
    <description>namenode上存储hdfs名字空间元数据 </description>
</property>
<property>
    <name> dfs.datanode.data.dir</name>
    <value>/home/hadoop/data_hadoop/hdfs/data</value>
    <description>datanode上数据块的物理存储位置</description>
</property>
<property>
    <name>dfs.replication</name>
    <value>2</value>
    <description>副本个数,配置默认是3,应小于datanode机器数量</description>
</property>
<property>
 <name>dfs.namenode.rpc-address</name>
 <value>bigdata.lzf:9001</value>
 <description>RPC address that handles all clients requests。有人说需要和fs.defaultFS 一样端口</description>
</property>
 
<property>
 <name>dfs.namenode.http-address</name>
 <value>bigdata.lzf:50070</value>
 <description>
 The address and the base port where the dfs namenode web ui will listen on.
 If the port is 0 then the server will start on a free port.
 </description>
</property>
<property>
 <name>dfs.namenode.secondary.http-address</name>
 <value>bigdata.dn1.lzf:50090</value>
</property>
 
slaves
#有两个节点
bigdata.lzf
bigdata.dn1.lzf
 
yarn-site.xml
#只是用于nodemanager
<configuration>
<property>
        <name>yarn.nodemanager.aux-services</name>
        <value>mapreduce_shuffle</value>
</property>
 
 
 
2.2 .192.168.56.3  配置
 
core-site.xml
 
<property>
 <name>fs.defaultFS</name>
 <value>hdfs://bigdata.lzf:9001</value>
 <description>HDFS的URI,文件系统://namenode标识:端口号,默认是9000</description>
</property>
<property>
 <name>hadoop.tmp.dir</name>
 <value>/home/hadoop/data_hadoop/tmp</value>
 <description>namenode上本地的hadoop临时文件夹</description>
</property>
<property>
  <name>ipc.client.connect.max.retries</name>
  <value>100</value>
  <description>默认10次,现在配置100次</description>
</property>
<property>
  <name>ipc.client.connect.retry.interval</name>
  <value>10000</value>
  <description>连接间隔1秒钟,默认是0.1秒</description>
</property>
  –为了权限,例如通过beeline之类的通过访问
  添加以下内容:
<property>
 <name>hadoop.proxyuser.hadoop.hosts</name>
 <value>*</value>
</property>
<property>
 <name>hadoop.proxyuser.hadoop.groups</name>
 <value>*</value>
</property>
 
hdfs-site.xml 
 
<property>
    <name> dfs.namenode.name.dir</name>
    <value>/home/hadoop/data_hadoop/hdfs/name</value>
    <description>namenode上存储hdfs名字空间元数据 </description>
</property>
<property>
    <name> dfs.datanode.data.dir</name>
    <value>/home/hadoop/data_hadoop/hdfs/data</value>
    <description>datanode上数据块的物理存储位置</description>
</property>
<property>
    <name>dfs.replication</name>
    <value>2</value>
    <description>副本个数,配置默认是3,应小于datanode机器数量</description>
</property>
<property>
 <name>dfs.namenode.rpc-address</name>
 <value>bigdata.lzf:9001</value>
 <description>RPC address that handles all clients requests。有人说需要和fs.defaultFS 一样端口</description>
</property>
<property>
 <name>dfs.namenode.http-address</name>
 <value>bigdata.lzf:50070</value>
 <description>
 The address and the base port where the dfs namenode web ui will listen on.
 If the port is 0 then the server will start on a free port.
 </description>
</property>
<property>
 <name>dfs.namenode.secondary.http-address</name>
 <value>bigdata.dn1.lzf:50090</value>
</property>
 
slaves
#有两个节点
bigdata.lzf
bigdata.dn1.lzf
 
yarn-site.xml
#resourceManager,nodemanager
<configuration>
 <property>
   <name>yarn.resourcemanager.address</name>
   <value>bigdata.dn1.lzf:8032</value>
   <description>资源管理器地址</description>
 </property>
<property>
        <name>yarn.resourcemanager.hostname</name>
        <value>bigdata.dn1.lzf</value>
        <description>资源管理器节点名称 </description>
</property>
<property>
        <name>yarn.resourcemanager.scheduler.class</name>
        <value> org.apache.hadoop.yarn.server.resourcemanager.scheduler.capacity.CapacityScheduler</value>
        <description>调度器类 </description>
</property>
<property>
        <name>yarn.nodemanager.aux-services</name>
        <value>mapreduce_shuffle</value>
</property>
<property>
        <name>yarn.resourcemanager.webapp.address</name>
        <value>bigdata.dn1.lzf:8099</value>
        <description>用于管理集群的资源,可以通过浏览器访问 </description>
</property>
<property>
        <name>yarn.nodemanager.webapp.address</name>
        <value>bigdata.dn1.lzf:8042</value>
        <description>用于管理节点,可以通过浏览器访问 </description>
</property>
 
</configuration>
 
3.初始化
 
在2节点上执行
hdfs namenode -format 
不需要执行hdfs secondarynamenode -format
 
 
4.启动
 
4.1启动dfs
在主节点2行执行start-dfs.sh即可:
[hadoop@bigdata sbin]$ ./start-dfs.sh

17/07/21 17:28:44 DEBUG util.NativeCodeLoader: Trying to load the custom-built native-hadoop library…
17/07/21 17:28:44 DEBUG util.NativeCodeLoader: Loaded the native-hadoop library
Starting namenodes on [bigdata.lzf]
bigdata.lzf: starting namenode, logging to /home/hadoop/hadoop-2.8.0/logs/hadoop-hadoop-namenode-bigdata.lzf.out
bigdata.dn1.lzf: starting datanode, logging to /home/hadoop/hadoop-2.8.0/logs/hadoop-hadoop-datanode-bigdata.dn1.lzf.out
bigdata.lzf: starting datanode, logging to /home/hadoop/hadoop-2.8.0/logs/hadoop-hadoop-datanode-bigdata.lzf.out
Starting secondary namenodes [bigdata.dn1.lzf]
bigdata.dn1.lzf: starting secondarynamenode, logging to /home/hadoop/hadoop-2.8.0/logs/hadoop-hadoop-secondarynamenode-bigdata.dn1.lzf.out
17/07/21 17:29:05 DEBUG util.NativeCodeLoader: Trying to load the custom-built native-hadoop library…
17/07/21 17:29:05 DEBUG util.NativeCodeLoader: Loaded the native-hadoop library
 
然后可以在2,3上使用jps,分别可以看到以下内容 
5620 Jps
5239 NameNode
5373 DataNode
4069 DataNode
4261 Jps
4167 SecondaryNameNode
 
4.2 启动yarn
然后在节点3上执行:start-yarn.sh
注意:3节点才是配置为资源管理器节点的,所以只能从3启动,而不是从2
译注: 也许以后的版本不需要如此了!
         如果在2上执行start-yarn.sh也可以启动yarn集群,但rm就是2,而不是3了。
 
5.测试
 
创建目录
[hadoop@bigdata sbin]$ hadoop fs -mkdir /tmp
17/07/21 17:33:03 DEBUG util.NativeCodeLoader: Trying to load the custom-built native-hadoop library…
17/07/21 17:33:03 DEBUG util.NativeCodeLoader: Loaded the native-hadoop library
[hadoop@bigdata sbin]$ hadoop fs -ls /
17/07/21 17:33:16 DEBUG util.NativeCodeLoader: Trying to load the custom-built native-hadoop library…
17/07/21 17:33:16 DEBUG util.NativeCodeLoader: Loaded the native-hadoop library
Found 1 items
drwxr-xr-x   – hadoop supergroup          0 2017-07-21 17:33 /tmp
上传文件
[hadoop@bigdata sbin]$ hadoop fs -copyFromLocal -f  start-dfs.sh  hdfs://bigdata.lzf:9001/tmp
17/07/21 17:35:29 DEBUG util.NativeCodeLoader: Trying to load the custom-built native-hadoop library…
17/07/21 17:35:29 DEBUG util.NativeCodeLoader: Loaded the native-hadoop library
 
查看
这个是在3上执行的,前面创建目录和上传是在2执行的。
[hadoop@bigdata ~]$ hadoop fs -tail hdfs://bigdata.lzf:9001/tmp/start-dfs.sh
17/07/21 17:41:18 DEBUG util.NativeCodeLoader: Trying to load the custom-built native-hadoop library...
17/07/21 17:41:18 DEBUG util.NativeCodeLoader: Loaded the native-hadoop library
----------------------------------------
# quorumjournal nodes (if any)

SHARED_EDITS_DIR=$($HADOOP_PREFIX/bin/hdfs getconf -confKey dfs.namenode.shared.edits.dir 2>&-)

case "$SHARED_EDITS_DIR" in
qjournal://*)
  JOURNAL_NODES=$(echo "$SHARED_EDITS_DIR" | sed \'s,qjournal://\([^/]*\)/.*,\1,g; s/;/ /g; s/:[0-9]*//g\')
  echo "Starting journal nodes [$JOURNAL_NODES]"
  "$HADOOP_PREFIX/sbin/hadoop-daemons.sh" \
      --config "$HADOOP_CONF_DIR" \
      --hostnames "$JOURNAL_NODES" \
      --script "$bin/hdfs" start journalnode ;;
esac

#---------------------------------------------------------
# ZK Failover controllers, if auto-HA is enabled
AUTOHA_ENABLED=$($HADOOP_PREFIX/bin/hdfs getconf -confKey dfs.ha.automatic-failover.enabled)
if [ "$(echo "$AUTOHA_ENABLED" | tr A-Z a-z)" = "true" ]; then
  echo "Starting ZK Failover Controllers on NN hosts [$NAMENODES]"
  "$HADOOP_PREFIX/sbin/hadoop-daemons.sh" \
    --config "$HADOOP_CONF_DIR" \
    --hostnames "$NAMENODES" \
    --script "$bin/hdfs" start zkfc
fi

# eof

 

http访问 
 
50070  默认是访问集群中的数据节点
http://bigdata.lzf:50070/explorer.html#/tmp  可以直接访问 hdfs://bigdata.lzf:9001/tmp在的文件。
50075 用户访问具体的数据节点
http://bigdata.lzf:50075,http://bigdata.dn1.lzf:50075
 
hadoop 的 wordcount 测试
 
hadoop jar /home/hadoop/hadoop-2.8.0/share/hadoop/mapreduce/hadoop-mapreduce-examples-2.8.0.jar grep hdfs://bigdata.lzf:9001/tmp/hadoop-hadoop-namenode-bigdata.lzf.log  output \'(lzf)\’
17/07/24 11:44:04 INFO mapreduce.Job: Counters: 29
	File System Counters
		FILE: Number of bytes read=604458
		FILE: Number of bytes written=1252547
		FILE: Number of read operations=0
		FILE: Number of large read operations=0
		FILE: Number of write operations=0
		HDFS: Number of bytes read=1519982
		HDFS: Number of bytes written=0
		HDFS: Number of read operations=12
		HDFS: Number of large read operations=0
		HDFS: Number of write operations=5
	Map-Reduce Framework
		Combine input records=0
		Combine output records=0
		Reduce input groups=0
		Reduce shuffle bytes=0
		Reduce input records=0
		Reduce output records=0
		Spilled Records=0
		Shuffled Maps =0
		Failed Shuffles=0
		Merged Map outputs=0
		GC time elapsed (ms)=0
		Total committed heap usage (bytes)=169222144
	Shuffle Errors
		BAD_ID=0
		CONNECTION=0
		IO_ERROR=0
		WRONG_LENGTH=0
		WRONG_MAP=0
		WRONG_REDUCE=0
	File Output Format Counters 
		Bytes Written=0

 根据测试,输出的内容会放在/user/hadoop/output目录下,事先不创建也没有关系。

 
6.遇到问题
6.1 ip地址变更的问题  
由于其中的主节点原来是承担了所有的角色,而且ip地址和现有的也不同。
其次,重新格式化之后,并没有删除掉原来的元数据目录。
所以,只好手动删除掉
rm -Rf   /home/hadoop/data_hadoop/hdfs/name
rm -Rf   /home/hadoop/data_hadoop/hdfs/data
rm -Rf   /home/hadoop/data_hadoop/hdfs/tmp
mkdir -p  /home/hadoop/data_hadoop/hdfs/name
mkdir -p   /home/hadoop/data_hadoop/hdfs/data
mkdir -p /home/hadoop/data_hadoop/tmp

 

6.2 区分namenode和secondarynamenode 的关键

hdfs-site.xml中改配置如下

<property>
 <name>dfs.namenode.http-address</name>
 <value>bigdata.lzf:50070</value>
 <description>
 The address and the base port where the dfs namenode web ui will listen on.
 If the port is 0 then the server will start on a free port.
 </description>
</property>
<property>
 <name>dfs.namenode.secondary.http-address</name>
 <value>bigdata.dn1.lzf:50090</value>
</property> 

通过这个最简单的配置,了解hadoop中集群的简单工作原理。
 
后续的研究,包括:
1.增加数据节点
2.搭建ha-hadoop集群
3.搭建基于yarn的presto集群

版权声明:本文为lzfhope原创文章,遵循 CC 4.0 BY-SA 版权协议,转载请附上原文出处链接和本声明。
本文链接:https://www.cnblogs.com/lzfhope/p/7151861.html