网络摄像头1 mjpg-streamer使用方法

-song 2021-09-05 原文

在start_uvc.sh或start_s3c24c0.sh里面，

//cmos摄像头
./mjpg_streamer -o "output_http.so -w ./www" -i "input_s3c2410.so"

//usb摄像头
./mjpg_streamer -o "output_http.so -w ./www" -i "input_uvc.so"

还可以是

## this is the minimum command line to start mjpg-streamer with webpages
## for the input-plugin default parameters are used
#./mjpg_streamer -o "output_http.so -w `pwd`/www"

## to query help for the core:
# ./mjpg_streamer --help

## to query help for the input-plugin "input_uvc.so":
# ./mjpg_streamer --input "input_uvc.so --help"

## to query help for the output-plugin "output_file.so":
# ./mjpg_streamer --output "output_file.so --help"

## to query help for the output-plugin "output_http.so":
# ./mjpg_streamer --output "output_http.so --help"

## to specify a certain device, framerage and resolution for the input plugin:
# ./mjpg_streamer -i "input_uvc.so -d /dev/video2 -r 320x240 -f 10"

## to start both, the http-output-plugin and write to files every 15 second:
# mkdir pics
# ./mjpg_streamer -o "output_http.so -w `pwd`/www" -o "output_file.so -f pics -d 15000"

## to protect the webserver with a username and password (!! can easily get sniffed and decoded, it is just base64 encoded !!)
# ./mjpg-streamer -o "output_http.so -w ./www -c UsErNaMe:SeCrEt"

## If you want to track down errors, use this simple testpicture plugin as input source.
## to use the testpicture input plugin instead of a webcam or folder:
# ./mjpg_streamer -i "./input_testpicture.so -r 320x240 -d 500" -o "./output_http.so -w www"