close all;
clc;
clear;

str = \'E:\matlab\temp_data\\';
files = dir(strcat(str,\'*.txt\'));
number_files = length(files);

x = zeros(number_files,4526);
y = zeros(number_files,4526);
N = 5;
a = zeros(number_files,N+1);
fun_name = blanks(number_files);

for i=1:number_files
    str1 = sprintf(\'%s%s\',str,files(i).name);
    [temp,lev] = textread(str1,\'%f,%f\');
    x(i,:) = temp;
    y(i,:) = lev - lev(1);
    a(i,:) = polyfit(x(i,:),y(i,:),N)
    
    figure;
    plot(x(i,:),y(i,:));
    freq = str2num(files(i).name(regexp(files(i).name,\'\d\')));
    if (freq < 1e3)
        str2 = sprintf(\'%s%.1f%s\',\'频率：\',freq,\'Hz\');
    elseif(freq <1e6)
        str2 = sprintf(\'%s%.4f%s\',\'频率：\',freq/1e3,\'kHz\');
    elseif(freq < 1e9)
        str2 = sprintf(\'%s%.7f%s\',\'频率：\',freq/1e6,\'MHz\');
    else
        str2 = sprintf(\'%s%.10f%s\',\'频率：\',freq/1e9,\'GHz\');
    end
    title(str2);
    legend(\'温度-幅度\');
    xlabel(\'温度\');
    ylabel(\'幅度\');
end


%%阶数判断
% for i=1:5
%     y2=polyfit(x,y,i);
%     Y=polyval(y2,x);%计算拟合函数在x处的值。
%     if sum((Y-y).^2)<0.1
%         c=i  
%         break;
%     end
% end

　　读取文本函数：[temp,lev] = textread(str1,\’%f,%f\’);

扫描文件夹函数

str = \’E:\matlab\temp_data\\’;
files = dir(strcat(str,\’*.txt\’));

版权声明：本文为yssrf-possible原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://www.cnblogs.com/yssrf-possible/p/12419540.html